I'm attempting to set a small PBX system. I'm using Asterisk @ Home 2.8 with a Digium TDM11B card. The fxo card is in port 4, the fxs card is in port 1. I have the phone-line connected to port 4 and the phone unit to port 1.
My /etc/zaptel.conf is: fxoks=1 fxsks=4 loadzone=uk loadzone=uk
My /etc/asterisk/zapata.conf includes: echocancel=yes echocancelwhenbridged=yes echotraining=400 callerid=<my callerid> signalling=fxo_ks group=1 context=default channel => 1
signalling=fxs_ks callerid=asreceived group=2 context=incoming channel => 4
My /etc/asterisk/extensions.conf is: [globals] OUTBOUNDTRUNK=Zap/4
[incoming] exten => s,1,Wait(1) exten => s,2,Answer() exten => s,3,Playback(hello-world) exten => s,4,Hangup()
[outbound] exten => _9XXXXXXXXXXX,1,Dial($(OUTBOUNDTRUNK)/${EXTEN:1}) exten => _9XXXXXXXXXXX,2,Congestion() exten => _9XXXXXXXXXXX,102,Congestion()
The _9XXXXXXXXXX should allow me to call number like 07770 123456 using a 9 prefix from the phone, if I understand the documentation correctly.
Some of this information was from the supplier of the card and others were from Asterisk O'Reilly book.
Incoming calls work as expected, but as soon as I attempt to use my phone to dial a number, it hangs up. I hear a dial-tone to begin with, but pressing a single button makes it hang up. The log from Asterisk is: --Starting simple switch on 'Zap/1-1' --Hungup 'Zap/1-1'
What is wrong? This is really confusing. I'm a newbie to Asterisk so if there is something I have missed above, please point it out.
--
Ashley T. Howes, Ph.D. http://www.ashleyhowes.com/
"The proper function of man is to live, not to exist." - Jack London