Hi everyone... Hoping that somone can shed a bit of light on a problem I'm having.. I have installed all the necessary rpm's (I think), yet after editing the lilo.conf and running lilo -v I'm getting a strange error message telling me that it's too big !!! (See below) The output from free is ... total used free shared buffers cached Mem: 257676 47808 209868 11668 5412 26944 -/+ buffers/cache: 15452 242224 Swap: 207984 0 207984 If it at all helps, the hardware is an IBM Netfinity 4500, Single Proc, 256MB RAM, Hardware RAID5 using the IBM Servraid 4L adapter. ##### Output from "lilo -v" ###### LILO version 21, Copyright 1992-1998 Werner Almesberger Reading boot sector from /dev/sda Merging with /boot/boot.b Boot image: /boot/vmlinuz-2.2.14-5.0 Mapping RAM disk /boot/initrd-2.2.14-5.0.img Added linux Boot image: /boot/vmlinux-2.2.16-3 Kernel /boot/vmlinux-2.2.16-3 is too big <----- what have I done wrong ##### Here's my lilo.conf ###### boot=/dev/sda map=/boot/map install=/boot/boot.b prompt timeout=50 linear default=linux16 image=/boot/vmlinuz-2.2.14-5.0 label=linux initrd=/boot/initrd-2.2.14-5.0.img read-only root=/dev/sda7 image=/boot/vmlinux-2.2.16-3 label=linux16 initrd=/boot/initrd-2.2.16-3.img read-only root=/dev/sda7 TIA Simon P.S. I'll be bringing this machine along to the next ALUG meet.. An organization is like a tree full of monkeys, all on different limbs at different levels, some climbing up, some fooling around and some simply just idling.... The monkeys on top looks down and see a tree full of smiling faces.... The monkeys on the bottom look up and see nothing but assholes...