Hi Everyone,
I've just had NTL broadband installed and I'm racking my brains trying figure out how to get dhcpcd working (and there's been much rolling of eyes and nashing of teeth).
I think the command is something like
#dhclient
or
#dhcpcd -D -H eth0
Any advice greatly appreciated
I'm running Slack 9.1
dmesg dhcpcd[1318]: timed out waiting for a valid DHCP server response
# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised auto-negotiation: Yes Speed: 10Mb/s Duplex: Half Port: MII PHYAD: 1 Transceiver: internal Auto-negotiation: on Current message level: 0x00000001 (1) Link detected: yes
#lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266/KL266] Host Bridge Subsystem: VIA Technologies, Inc.: Unknown device 0000 Flags: bus master, medium devsel, latency 8 Memory at e0000000 (32-bit, prefetchable) [size=32M] Capabilities: [a0] AGP version 2.0 Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: dfe00000-dfefffff Prefetchable memory behind bridge: d7b00000-dfcfffff Capabilities: [80] Power Management version 2
00:08.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: ALi Corporation USB 1.1 Controller Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11 Memory at dfffc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [60] Power Management version 2
00:08.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: ALi Corporation USB 1.1 Controller Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5 Memory at dfffd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [60] Power Management version 2
00:08.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10 [OHCI]) Subsystem: ALi Corporation USB 1.1 Controller Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11 Memory at dfffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [60] Power Management version 2
00:08.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: ALi Corporation USB 2.0 Controller Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 12 Memory at dfffff00 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Capabilities: [58] #0a [2090]
00:09.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 86) Subsystem: VIA Technologies, Inc.: Unknown device 0105 Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at ec00 [size=256] Memory at dffffe00 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge Subsystem: VIA Technologies, Inc.: Unknown device 0000 Flags: bus master, stepping, medium devsel, latency 0 Capabilities: [c0] Power Management version 2
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE Flags: bus master, medium devsel, latency 32, IRQ 255 I/O ports at fc00 [size=16] Capabilities: [c0] Power Management version 2
00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at d800 [size=32] Capabilities: [80] Power Management version 2
00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at dc00 [size=32] Capabilities: [80] Power Management version 2
00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1b) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Flags: bus master, medium devsel, latency 32, IRQ 11 I/O ports at e000 [size=32] Capabilities: [80] Power Management version 2
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 30) Subsystem: VIA Technologies, Inc.: Unknown device 4161 Flags: medium devsel, IRQ 5 I/O ports at e400 [size=256] Capabilities: [c0] Power Management version 2
00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev 70) Subsystem: SILICON Laboratories: Unknown device 4c21 Flags: medium devsel, IRQ 5 I/O ports at e800 [size=256] Capabilities: [d0] Power Management version 2
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 70) Subsystem: VIA Technologies, Inc. VT6102 [Rhine II] Embeded Ethernet Controller on VT8235 Flags: bus master, medium devsel, latency 32, IRQ 12 I/O ports at d400 [size=256] Memory at dffffd00 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2
01:00.0 VGA compatible controller: STMicroelectronics STG4000 [3D Prophet Kyro Series] (rev 01) (prog-if 00 [VGA]) Subsystem: Hercules: Unknown device c028 Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 12 Memory at d8000000 (32-bit, prefetchable) [size=64M] Memory at dfc80000 (32-bit, prefetchable) [size=512K] I/O ports at c800 [size=256] Expansion ROM at dfee0000 [disabled] [size=128K] Capabilities: [40] AGP version 2.0 Capabilities: [60] Power Management version 2
Cheers Doug www.humorix.org