[ALUG] Dead hard drive?

Hi fellow ALUGgers,

Started getting fsck errors on a drive, ran smartctl -t long and smartctl -a.

Full output: http://pastebin.com/tQX0TX4m

Snipped output:

=== START OF INFORMATION SECTION === Model Family: Western Digital Caviar Green Device Model: WDC WD10EACS-11FBRB0

SMART support is: Available - device has SMART capability. SMART support is: Enabled

=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED

General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run.

SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 198 198 051 Pre-fail Always - 101 3 Spin_Up_Time 0x0027 123 114 021 Pre-fail Always - 6850 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1022 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 1 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 8569 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1000 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 53 193 Load_Cycle_Count 0x0032 180 180 000 Old_age Always - 60861 194 Temperature_Celsius 0x0022 130 102 000 Old_age Always - 17 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0032 198 198 000 Old_age Always - 355 198 Offline_Uncorrectable 0x0030 199 199 000 Old_age Offline - 170 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 199 199 000 Old_age Offline - 260

SMART Error Log Version: 1 No Errors Logged

SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 8563 323143936 # 2 Extended offline Completed: read failure 90% 8560 323143936 # 3 Extended offline Completed without error 00% 8303 - # 4 Extended offline Completed without error 00% 732 -

Is the drive cooked?

Why does the self test execution status report all is ok? Why does offline data collection status report without error? Why is the overall status PASSED?

Thanks, Srdjan