Neill Newman wrote:
Laurie Brown wrote:
Raphael Mankin wrote:
[SNIP]
In any case, since telnet works, it is something between when inetd is started and the end of the rc.d processing.
Telnet works up until I use X, and then it just dies on me. I'll try again, and give it a while to see if it times out.
hhmm logs/kernel version/X version needed.. try running X and piping the output to a file and posting..
Sz
No problem (I'm running 2.2.12 kernel, not 2.0.36 as it says here):
---- cut here ----
XFree86 Version 3.3.3.1 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: January 4 1999 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.0.36 i686 [ELF] Configured drivers: S3: accelerated server for S3 graphics adaptors (Patchlevel 0) newmmio, mmio_928, s3_generic (using VT number 7)
XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: rules: "xfree86" (**) XKB: model: "pc104" (**) XKB: layout: "gb" (**) Mouse: type: PS/2, device: /dev/psaux, samplerate: 60 (**) Mouse: buttons: 3 (**) S3: Graphics device ID: "Primary-Card" (**) S3: Monitor ID: "Primary-Monitor" (--) S3: Mode "1600x1000" needs vert refresh rate of 33.14 Hz. Deleted. (--) S3: Mode "1280x960" needs vert refresh rate of 43.07 Hz. Deleted. (--) S3: Mode "1600x1200" needs vert refresh rate of 27.61 Hz. Deleted. (--) S3: Mode "1280x1024" needs vert refresh rate of 40.37 Hz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/75dpi:unscaled,/usr/X11R6/lib/X11/fonts/100dpi:unscaled,/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/URW,/usr/X11R6/lib/X11/fonts/Speedo,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi" (--) S3: PCI: Trio32/64 rev 0, Linear FB @ 0xe5000000 (--) S3: chipset: Trio64 rev. 2 (--) S3: chipset driver: mmio_928 (--) S3: card type: PCI (--) S3: Diamond Stealth BIOS found (**) S3: videoram: 2048k (--) S3: Ramdac type: s3_trio64 (--) S3: Ramdac speed: 135 MHz (--) S3: Using Trio32/64 programmable clock (MCLK 59.957 MHz) (--) S3: Maximum allowed dot-clock: 80.000 MHz (**) S3: Mode "800x600": mode clock = 52.000 (**) S3: Using 16 bpp. Color weight: 565 (--) S3: Virtual resolution set to 800x600 (--) S3: Local bus LAW is 0xE5000000 (--) S3: Using a banksize of 2048k, line width of 800 (--) S3: Using a single 64x64 area at (736,601) for expanding pixmaps (--) S3: Using 16 planes of 736x709 at (0,601) aligned 8 as font cache Starting kfm -d...Done. Starting kcontrol -init...Done. Starting kbgndwm...Done. Starting krootwm...Done. Starting kpanel...Done. Some pixmaps are not valid: GimmickMode dissabled KBackground::KBackground KScreenSaver::KScreenSaver KFonts::KFonts KGeneral::KGeneral inserted keys read settings got key dict KKeyChooser::readGlobalKeys() Make key chooser standard Change: Replace Change: Next Change: Copy Change: Undo Change: Close Change: Prior Change: Open Change: Find Change: Insert Change: End Change: Print Change: New Change: Quit Change: Save Change: Home Change: Paste Change: Cut Change: Help read scheme done KKeyConfig destructor inserted keys read settings got key dict KKeyChooser::readGlobalKeys() Make key chooser standard Change: Replace Change: Next Change: Copy Change: Undo Change: Close Change: Prior Change: Open Change: Find Change: Insert Change: End Change: Print Change: New Change: Quit Change: Save Change: Home Change: Paste Change: Cut Change: Help read scheme done KKeyConfig destructor add top window add top window
[ This email came to you via the Anglian Linux User Group list ] [ If you only wish to recieve event announcements, email the ] [ SUBJECTs of "unsubscribe alug" and "subscribe alug-announce" ] [ to listserver@stu.uea.ac.uk -- We do need your support, tho' ]