I'm having problems understanding what is happening on my RAID array.
$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sda1[0] sdb1[1](F) 976629568 blocks super 1.2 [2/1] [U_]
To me, that suggests that sdb has failed, however, syslog contains lots of errors on sda but no mention of sdb.
Amongst the things I've learned this morning, is the fact that I'm not getting any notifications; this only came to light because a VM that is hosted on this RAID array has lost the ability to write to one of its virtual disks (but not all of them).
Should I conclude that both disks have failed? What is the best route to recovery here? Ie which disk do I swap out first with a new disk? Logically swapping out sda is the only thing that makes sense to me but advice welcomed.
smartctl reports that neither disk had SMART enabled, which is odd because I thought they had, so there's no information there. I have enabled it this morning but don't want to try doing self-tests at this stage unless someone more knowledgeable than me says I should.
Mark
-- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0844 251 1450 Registered in England (0456 0902) @ 13 Clarke Rd, Milton Keynes, MK1 1LG