I used this solution and it appears to have worked:
mount the cdrom insert floppy disk, then do this command:- dd if=/mnt/cdrom/images/cdrom.img of=/dev/fd0
when it is done copying files, issue "reboot" or "shutdown -r now" with the floppy in the drive, and hey presto, the install will begin.
There are still some problems when I start Gnome. These may be unconnected, at least the install completed without crashing. I will try reconfiguring XFree86.
Incidentally, it is an old machine, P100 and with only 16MB RAM. It ran Win98 well enough, which was what I used on my first attempt to install from the CD.
Thanks for all your replies.
Regards
Russell
_________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com
Hi Russell
A P100 probably does not have the BIOS option to boot from the CDROM..
If you really want to run a graphical interface on this box, 16MB is barely enough. Try to track down some more memory to give the system more oomph. I might even have a few odd 72 pin SIMMs kicking around here along with a spare P133 chip. More "scraping the barrel" than "cutting edge" technology, but for some of what I do, it is more than sufficient.
Regards, Paul.
On Thursday 27 Jun 2002 8:53 am, Russell Ward wrote:
There are still some problems when I start Gnome. These may be unconnected, at least the install completed without crashing. I will try reconfiguring XFree86.
Incidentally, it is an old machine, P100 and with only 16MB RAM. It ran Win98 well enough, which was what I used on my first attempt to install from the CD.
-
Paul -
Russell Ward