Hi, I'm having trouble recently with the tops being chopped off of my printouts, using a usual lpr+ghostscript setup. From talking to a few people, this isn't a rare problem, but does anyone have a solution? Thanks, MJR
MJ Ray wrote:
I'm having trouble recently with the tops being chopped off of my printouts, using a usual lpr+ghostscript setup. From talking to a few people, this isn't a rare problem, but does anyone have a solution?
<flippant mode> Longer paper :-) </flippant mode> Had this problem with the top 1mm so changed the margins in the gs setup my Mandrake 7.1 uses a console tool for this- which increments in points (1/72in) increments. I expect that Slack uses a config file and text editor (the proper way). Strange if this has just started to happen though, had a Windows inkjet that did it, turned out to be paper dust on the feed rollers, just a thought. Cheers, BJ
Sounds as if you ahge the wrong paper size configured On 23-Oct-00 MJ Ray wrote:
Hi,
I'm having trouble recently with the tops being chopped off of my printouts, using a usual lpr+ghostscript setup. From talking to a few people, this isn't a rare problem, but does anyone have a solution?
Thanks,
MJR
_______________________________________________ alug, the Anglian Linux User Group list Email: alug@stu.uea.ac.uk http://rabbit.stu.uea.ac.uk/cgi-bin/listinfo/alug See the website for instructions on digest or unsub!
-- Politics: The conduct of public affairs for private advantage Ambrose Bierce Raphael Mankin E-Mail: raph@panache.demon.co.uk ----------------------------------
On Thu, 7 Feb 2036, Raphael Mankin wrote: What version of the Linux kernel is available in 2036 then, is M$ still around? what other cool technologys are available? ;-)
Sounds as if you ahge the wrong paper size configured
On 23-Oct-00 MJ Ray wrote:
Hi,
Adam -- Adam Bower, <abower@zeus.com> Tel: +44 1223 525000 System Administrator Fax: +44 1223 525100 Zeus Technology Ltd http://www.zeus.com Zeus House, Cowley Road Cambridge CB4 0ZT England
Oops. I've gine myself away. Time travel was supposed to be a secret. Some of the time servers I use are a bit flakey. It's not easy finding a good set :-( On 25-Oct-00 Adam Bower wrote:
On Thu, 7 Feb 2036, Raphael Mankin wrote:
What version of the Linux kernel is available in 2036 then, is M$ still around? what other cool technologys are available? ;-)
Sounds as if you ahge the wrong paper size configured
On 23-Oct-00 MJ Ray wrote:
Hi,
Adam -- Adam Bower, <abower@zeus.com> Tel: +44 1223 525000 System Administrator Fax: +44 1223 525100 Zeus Technology Ltd http://www.zeus.com Zeus House, Cowley Road Cambridge CB4 0ZT England
_______________________________________________ alug, the Anglian Linux User Group list Email: alug@stu.uea.ac.uk http://rabbit.stu.uea.ac.uk/cgi-bin/listinfo/alug See the website for instructions on digest or unsub!
-- Politics: The conduct of public affairs for private advantage Ambrose Bierce Raphael Mankin E-Mail: raph@panache.demon.co.uk ----------------------------------
Hi all, MJ Ray wrote:
Hi,
I'm having trouble recently with the tops being chopped off of my printouts, using a usual lpr+ghostscript setup. From talking to a few people, this isn't a rare problem, but does anyone have a solution?
The only time I have seen this is when printing from an app like StarOffice when the margins are too small for my printer and those chopped are usually at the bottom - SO prints the top of a text doc first. Please ignore me if I am being too simplistic. Regards, Dermot
participants (5)
-
Adam Bower -
Dermot Musgrove -
John Woodard -
MJ Ray -
Raphael Mankin