This is about my new AMD installation.
After finally figuring out how to upgrade just the kernel so as to be able to make pm-suspend work properly, there is one remaining issue I can't seem to figure out, and that is the temperature sensors.
I have lm-sensors installed and this is what it shows:
k10temp-pci-00c3 Adapter: PCI adapter Tctl: +31.5°C
amdgpu-pci-0b00 Adapter: PCI adapter vddgfx: 856.00 mV vddnb: 737.00 mV edge: +30.0°C PPT: 0.00 W
nct6792-isa-0290 Adapter: ISA adapter in0: 864.00 mV (min = +0.00 V, max = +1.74 V) in1: 0.00 V (min = +0.00 V, max = +0.00 V) in2: 3.34 V (min = +0.00 V, max = +0.00 V) ALARM in3: 3.34 V (min = +0.00 V, max = +0.00 V) ALARM in4: 0.00 V (min = +0.00 V, max = +0.00 V) in5: 0.00 V (min = +0.00 V, max = +0.00 V) in6: 808.00 mV (min = +0.00 V, max = +0.00 V) ALARM in7: 3.41 V (min = +0.00 V, max = +0.00 V) ALARM in8: 3.25 V (min = +0.00 V, max = +0.00 V) ALARM in9: 1.83 V (min = +0.00 V, max = +0.00 V) ALARM in10: 176.00 mV (min = +0.00 V, max = +0.00 V) ALARM in11: 128.00 mV (min = +0.00 V, max = +0.00 V) ALARM in12: 1.84 V (min = +0.00 V, max = +0.00 V) ALARM in13: 1.68 V (min = +0.00 V, max = +0.00 V) ALARM in14: 0.00 V (min = +0.00 V, max = +0.00 V) fan1: 384 RPM (min = 0 RPM) fan2: 1023 RPM (min = 0 RPM) fan3: 0 RPM (min = 0 RPM) fan4: 0 RPM (min = 0 RPM) fan5: 0 RPM (min = 0 RPM) SYSTIN: +119.0°C (high = +0.0°C, hyst = +0.0°C) sensor = thermistor CPUTIN: +30.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor AUXTIN0: +37.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor = thermistor AUXTIN1: +108.0°C sensor = thermistor AUXTIN2: +109.0°C sensor = thermistor AUXTIN3: -128.0°C sensor = thermistor SMBUSMASTER 0: +31.5°C PCH_CHIP_CPU_MAX_TEMP: +0.0°C PCH_CHIP_TEMP: +0.0°C PCH_CPU_TEMP: +0.0°C TSI0_TEMP: +31.5°C intrusion0: OK [small snip...]
I don't get it. First, its impossible there can be 100C+ temps. The case fan is silent, the psu fan is not moving, the system works fine and feels cool in fact cold to the touch.
Second, how can it possibly be -128.0C on one of the readings?
The system itself seems to be running quite fast and perfectly silently. I have a Noctua low profile CPU cooler which should be more than equal to the cpu installed, the psu is a Corsair SFF, Gold 450, and it all seems fine. You hear the fans for a few seconds at startup, after that, silence.
I am running Debian stable but as in the earlier post when trying to get suspend to work, have the testing kernel installed. Was hoping that would clear up the temp problem but no luck.
By the way, acpi -t returns nothing.
Any suggestions? Or should I just stop worrying?
Peter