main May 2015

main@lists.alug.org.uk

12 participants
12 discussions

PC slow to boot prt 2
by Bev Nicolson 06 Dec '15

06 Dec '15

I asked about my slow to boot (and sometimes slow to shut down) pc a while back now and have htop installed. I should have asked this then but which bit of the info it gives me do I need to give you lot in order to diagnose the problem? Bev.

3 9

external HDD
by Anthony Anson 16 Jun '15

16 Jun '15

Just bought a portable hard drive enclosure and USB2 connection cable. The cable has two large USB connectors at one end - the second of which has a much shorter and skinnier cable; and a mini connector at the enclosure end. My not-very-portable storage of similar type, but big, has only one USB connector per end of its cable. I infer from this that the only one of the connectors at the pooter end should be (need be?) plugged in? The 500 GB HDD in the enclosure is SATA, as is the 160 GB one in the notebook. (because I had thought of installing things on the big one and puting it in the notebook...) Anyway, I can't poke it into life. I get the rude message: /Unable to mount location/ and underneath that: /Can't mount file./ Where is the fault? Hardware? Me? (I had meant to bring it along to the Norwich meet last night, but ) -- Tony http://www.girolle.co.uk/

4 7

Re: [ALUG] Hi
by John Cohen 02 Jun '15

02 Jun '15

Thanks for the welcome, good to know there's quite a few linux users around. Mark, I rely almost entirely on Pro Tools, which of course only runs on windows (badly) or mac, or a hackintosh in my case. But there are certain things I do on one of my linux boxes, like more creative sound design, including csound and pure data. Ardour's saved the day a few times when I needed emergency Foley recordings and didn't have my proper rig with me. I think I'm away on the 2nd Nev, but if not I might see you then. cheers, John -- John Cohen (+44)7500042065 www.john-cohen.com On 27 May 2015 at 13:18, Anthony Anson <tony.anson(a)girolle.co.uk> wrote: > On 27/05/15 12:51, Tony wrote: > >> >> Personal opinion of W7 is that it is bloated resource hog. >> > > Well, that's a 'given', but it's there, and there's loads and loads of > room on the HDD. I do have an XP CD and XP Crack, but have never used > either. > > Basic >> install consumes around 20gb. Is there not a linux alternative to >> Irfanview you could use? >> > > Don't think so, but haven't looked for ages. > > I use Shotwell to download and catalogue >> captures, Luminance HDR to process RAW HDR's, Gimp and Darktable to >> tweak and refine. Fotoxx could be an alternative to try. >> > > I've been using The Gimp, but for basic manipulation of graphics I haven't > found anything to beat Irfanview. > > -- > Tony > http://www.girolle.co.uk/ > > > _______________________________________________ > main(a)lists.alug.org.uk > http://www.alug.org.uk/ > http://lists.alug.org.uk/mailman/listinfo/main > Unsubscribe? See message headers or the web site above! >

2 1

Ubuntu UPS
by Mark Rogers 31 May '15

31 May '15

I've had a Leibert UPS for a while and for some reason I decided today to plug the UPS cable in so I could get around to configuring NUT. However I noticed that without doing anything else, Ubuntu (15.04) was showing me a battery indicator (much as it would if this was a laptop). I removed power and it showed discharging, but not until a few minutes had passed. Similarly when restoring power it too several minutes to show charging. Any ideas where I can tweak this? I can't see any of the usual tools installed. (I did find /sys/module/battery/parameters/cache_time but changing that to zero had no effect.) -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0844 251 1450 Registered in England (0456 0902) 21 Drakes Mews, Milton Keynes, MK8 0ER

1 0

Mapping a local IP to a remote one
by Mark Rogers 29 May '15

29 May '15

I'm sure that if I could make a decent job of explaining what I mean I could Google for this but... My PC is (say) 192.168.1.10, and it can access a remote device (192.168.2.100) via a VPN. What I want to do is give my PC an extra IP address (eg 192.168.1.11) and map all network traffic to that IP address (on any port, and including broadcast traffic) to 192.168.2.100, and send any responses back. In doing so, any other PC on my LAN would be able to access the remote device as if it were local (192.168.1.11). Can I do this? (Background: In this case I have some brain-dead Windows configuration software that can only talk to devices on the LAN, so I need to make the remote device appear as if it were on the LAN. However I have had similar challenges in the past where using a local Linux box as a conduit to remote devices would have been useful.) If relevant, whilst 192.168.2.100 is not a Linux PC (it's an industrial I/O unit), I do have a Linux PC on the remote network that could form part of the tunnel if required. The key point is that I need the remote unit to appear to be on the local network, not just to be accessible from it. My Windows PC can ping (etc) the remote unit fine via the VPN itself, but the configuration software will only search for and work with devices on 192.168.1.0/24, so I need to fake it. -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0844 251 1450 Registered in England (0456 0902) 21 Drakes Mews, Milton Keynes, MK8 0ER

3 3

Hi
by John Cohen 28 May '15

28 May '15

Hi everyone, I'm a sound designer living and working in Norwich and London (I mainly do sound-post production for films/commercials) I've been using linux for a few years now, (since 2007 I think?) and recently I've built and maintain a server for our small company. Still consider myself a rookie but am trying to learn as much as I can during my spare time! Look forward to reading you all / meeting some of you at a local pub some day. Cheers, John -- John Cohen

6 10

git help
by Chris Walker 28 May '15

28 May '15

Can somebody help me with some git commands please? I have a git repo called https://github.com/tonercloud/beertent and which contains two projects, harbour-beertent and harbour-beerguide. But I want to split out harbour-beerguide into a separate repository and also if possible move harbour-beertent up a level so that beertent is empty and just leave that repo as harbour-beertent. I created a folder on my machine called beerguide_gitrepo/ and having looked at this page and run step 3 - https://help.github.com/articles/splitting-a-subfolder-out-into-a-new-repos… that folder now contains a beertent folder and that in turn now has two sub-folders harbour-beertent and harbour-beerguide. But so does beertent_gitrepo. I've done as far as step 4 but that's where I am reluctant to go any further for fear of royally screwing things up. Step 5 says I should run 'git filter-branch' but for me, it lacks clarity. As I said above, I want to remove the beertent name and just leave things named harbour-* So can anybody tell me precisely the command(s) I should type in to remove harbour-beerguide from the local beertent_gitrepo and similarly remove harbour-beertent from the local beerguide_gitrepo and remove the beertent folders completely? TIA -- __ __| |_ __ __ .----------------------------------------------. / _/ _` \ V V / | mailto:alug_cdw@the-walker-household.co.uk | \__\__,_|\_/\_/ |______________________________________________|

2 3

Starting Nexus at Startup
by Paul Grenyer 28 May '15

28 May '15

Hi All I've got a digital ocean droplet with Sonatype's Nexus installed and I'm trying to get it to start when the droplet starts. I've followed the instructions here: https://books.sonatype.com/nexus-book/reference/install-sect-service.html and updated the properties file with these: NEXUS_HOME="/usr/local/nexus-2.11.2-06" RUN_AS_USER=nexus PIDDIR="/home/nexus" and can now start and stop the service like this: service nexus start service nexus stop I added the JAVA_HOME environment variable and added JAVAM_HOME/bin to the path for the nexus user, even though I suspect they're not needed. When I restart the droplet, nexus doesn't start. The nexus log isn't written to either. I believe I have the permissions right in /etc/inid.d: -rwxr-xr-x 1 root root 14639 May 28 01:48 /etc/init.d/nexus I've even tried adding: nexus ALL = NOPASSWD: /etc/init.d/nexus to the sudoers file, but all to no avail. I don't know where to check the log for service starts either. Can anyone help, please? -- Thanks Paul Paul Grenyer e: paul.grenyer(a)gmail.com b: paulgrenyer.blogspot.com t: pjgrenyer Have you thought what Naked Element could do for you? http://nakedelement.co.uk/ It's time to get technical: http://norfolkdevelopers.com

2 2

[ALUG Announce] 3rd Monday Monthly Ipswich Social Meeting : The Mulberry Tree
by samwise 18 May '15

18 May '15

ALUG Announce Please send announcements to Announce(a)lists.alug.org.uk Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce ----- The monthly "Third Monday" ALUG Ipswich Social Meeting is back today, 18th May, at 20:00: The Mulberry Tree 5 Woodbridge Road IPSWICH IP4 2EA Tel: 01473 225776 Map/Directions URI: http://maps.google.co.uk/?q=IP4+2EA WWW: https://www.facebook.com/MULBERRYHOSPITALITY The Mulberry Tree, previously known as The Milestone Beer House, is a grade 2 listed building in the centre of Ipswich. It is located at the intersection between Woodbridge Road and the A1156, across the road from the old Odeon cinema and not far from the Regent Theatre. It re-opened on Thursday March 29th 2012 after a major refurbishment, under its original name of The Mulberry House and has already begun to regain a good reputation for its selection of beers and ales. It has a sizeable car park to the rear of the building. All are welcome, novices and experienced users. Feel free to ask for further information on the Main ALUG mailing list. Unfortunately, I probably can't make it this evening - but hopefully there will be some other regulars in attendance. Feel free to discuss who's going and when on the main mailing list. Cheers, Peter. -- I ran the London Marathon 2015 in aid of the PSP Association. All sponsorship gratefully received. :) http://www.bagshot-row.org/marathonformum ----- Send discussion replies to main(a)lists.alug.org.uk (Reply-To set) Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce

1 0

LibreOffice Hackfest in Cambridge on May 21st
by Sam Tuke 07 May '15

07 May '15

Pardon my for posting directly to your mailing list -- I have an announcement that may be interesting to LibreOffice users in the area. Later this month on May 21st-23rd the first UK LibreOffice Hackfest takes place next to Cambridge Train Station. Everyone is welcome to participate and learn how to hack on LibreOffice. Full details, including transport, accommodation, and reimbursement information, can be found here: https://wiki.documentfoundation.org/Hackfest/Cambridge2015 A printable poster / flier about the event can be found here: https://libreoffice-from-collabora.com/spread-the-word-libreoffice-hackfest… Thanks for reading, Sam Tuke.

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main May 2015