- main - earth.li

[ALUG Announce] 3rd Monday Monthly Ipswich Social Meeting : McGintys, Northgate Street
by samwise 20 Oct '08

20 Oct '08

ALUG Announce Please send announcements to Announce(a)lists.alug.org.uk Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce ----- The monthly "Third Monday" ALUG Ipswich Social Meeting is back tonight (Monday 20th October) at 20:00: P J McGinty & Sons 15 Northgate Street Ipswich Suffolk IP1 3BY Tel: 01473 251 515 Map/Directions URI: http://maps.google.co.uk/?q=IP1+3BY WWW: http://pjmcginty.moonfruit.com/ McGintys pub is in the centre of Ipswich, not far from our old haunt - The Milestone. It's directly opposite the town's central library and has a reputation for good Irish beer. All are welcome, novices and experienced users. Hopefully, it shouldn't be too hard to find the pack, look for those huddled around a laptop! Feel free to ask for further information on the Main ALUG mailing list. Hope to see you there, Peter. ----- Send discussion replies to main(a)lists.alug.org.uk (Reply-To set) Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce

1 0

Re: [ALUG] Visio alternative?
by Rob Grant 17 Oct '08

17 Oct '08

main-request(a)lists.alug.org.uk wrote: > Send main mailing list submissions to > main(a)lists.alug.org.uk > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.alug.org.uk/mailman/listinfo/main > or, via email, send a message with subject or body 'help' to > main-request(a)lists.alug.org.uk > > You can reach the person managing the list at > main-owner(a)lists.alug.org.uk > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of main digest..." > > > Today's Topics: > > 1. Visio alternative? (Yvonne Everett) > 2. Re: Visio alternative? (Srdjan Todorovic) > 3. Re: Visio alternative? (David Reynolds) > 4. Re: Visio alternative? (Wayne Stallwood) > 5. Re: Visio alternative? (Jan T. Kim) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 16 Oct 2008 15:34:21 +0100 > From: "Yvonne Everett" <ye103910(a)googlemail.com> > Subject: [ALUG] Visio alternative? > To: ALUG <main(a)lists.alug.org.uk> > Message-ID: > <25b8c930810160734nc7f9e72qf9c722b5ff66d2a0(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hi > > Does anyone know of a good alternative to Visio? I have some network > diagrams I need to draw up but have had enough of the windoze > applications.... > > Thanks > > You might like to try www.best4c.com . It lets you draw cobweb diagrams for networks, UML, general concept maps and the like via your browser. You can then make the diagrams available online so that others can view them or copy a version to develop further. The interface is very smoothly done and results look good. I've been searching for something like this to use for collaborative curriculum development with colleagues at UEA, also for personal brainstorming/concept-mapping. I only came accross Best4c ia couple of days ago and it is the closest I've found so far- except that when I created an account and tried it out none of the diagrams I created would save, which is kind of a show stopper. Still good enough for me to try again soon though, could have been some latency in new account setup maybe. For a desktop app there is Cmaptools from http://cmap.ihmc.us/ that I have used on and off for a while. Rather resource hungry and insists on putting big things into windows profile space which causes problems with our odd UEA setup. Pretty intuitive and flexible though when not eating CPU. Seems crazy that when I want to chuck out ideas and play around linking and rearranging them paper is still hard to beat. Surely there is a better app somewhere? Rob -- Rob Grant Lecturer in Economics School of Development Studies University of East Anglia r.grant(a)uea.ac.uk +44(0)1603 592324

2 1

Visio alternative?
by Yvonne Everett 17 Oct '08

17 Oct '08

Hi Does anyone know of a good alternative to Visio? I have some network diagrams I need to draw up but have had enough of the windoze applications.... Thanks -- Yvonne Everett Email: ye103910(a)googlemail.com Mobile: +44 (0)7881 727213

5 4

Basic mail functionality with attachments
by Mark Rogers 15 Oct '08

15 Oct '08

I'm sure I should be able to solve this one easily with help from Google but I've drawn a blank so far. I have a basic box installed with Ubuntu-server (8.04), pretty much a default install. I want to send a couple of files from that box as attachments by email. I'm looking for the minimum necessary to do this. I don't really see the need for a mail server (it just needs to do a DNS lookup for an MX record then SMTP direct to that). I have so far installed mutt but that's unable to send without something extra being installed. -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0845 45 89 555 Registered in England (0456 0902) at 13 Clarke Rd, Milton Keynes, MK1 1LG

7 14

EeePc900
by Barry Chater 14 Oct '08

14 Oct '08

Hi just bought a Eeepc 900 from Morrisons for £199, I like it but am amazed to find no firewall installed,and as yet cannot find a way to install one. Still using the original linux OS. has any of you Eeepc owners managed to get a firewall installed? second question, Is it possible to fit an ide hard drive from a laptop into a desktop pc as a second drive, Thanks Barry

3 4

Correctly configuring hostnames
by Mark Rogers 14 Oct '08

14 Oct '08

I'm sure this is trivial but all the info I've found online has been too vague to help me sort it. If I want a Linux box (Ubuntu/Debian) to have the FQDN of mybox.example.com, where do I set it? I understand that /etc/hostname should contain the "mybox" bit, but where does example.com go? I would expect the following queries and responses hostname -d Should give "example.com", gives "" (empty string) hostname -s Should give "mybox", and does hostname --fqdn Should give "mybox.example.com", gives "mybox" I even managed to get "hostname -s" to return "mybox.example.com" earlier, although I can't now reproduce it. NB: I do know that after changing /etc/hostname I need to run hostname -F /etc/hostname -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0845 45 89 555 Registered in England (0456 0902) at 13 Clarke Rd, Milton Keynes, MK1 1LG

1 1

RAM issues - Help!
by Steven Rose 13 Oct '08

13 Oct '08

I'd really appreciate any help on this matter, not really being all that knowledgeable in the hardware at hand. I am running a Gigabyte GA-MA69G-S3H (rev 1.0) motherboard with the latest BIOS, F6 I believe. The proc is AMD Athlon(tm) 64 X2 Dual Core Processor 4800+. The operating system at present being Ubuntu 8.04.1, fully updated and so forth. (http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassVal…) The manual clearly states that the four DIMM slots run at a voltage of 1.8, this is also very clear in the CMOS settings. However, I have purchased a set of Corsair DDR2 800MHz XMS2 DHX, 2x2gb (http://www.ebuyer.com/product/142433) before realizing my potential issue. In the extended specifications it mentions something regarding 2.1 volts as it also does on the side of the heat-sinks. They are both currently in this particular machine and seem to be working fine, my concerns arise when running a memtest via GRUB. I have altered nothing in the BIOS merely replaced the old RAM and attempted to boot, which works fine, the memtest is stating something along the lines of 5-5-5-18, which I presume is related to the latency, however the RAM is branded as being 4-4-4-12, I am blissfully unaware as to whether it is running at the correct speed, or indeed voltage to work fully. Another point would be the system only displaying itself as having 3.2gigs rather than four, although this I presume could be normal as I am under 32bit userland. If my hardware will allow, of course, I wish to run this memory at its full capabilities. Any aid in this will be a great help. Cheers, Steve

3 3

Removing a disk drive, will it confuse things?
by Chris G 12 Oct '08

12 Oct '08

I want to remove one of the disk drives from my 'main' system (running Fedora 8). The drives on that system are currently:- /dev/VolGroup01/LogVol00 / ext3 defaults 1 1 LABEL=/boot1 /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/VolGroup00/LogVol01 swap swap defaults 0 0 /dev/VolGroup01/LogVol01 swap swap defaults 0 0 # # # Additions to see Fedora 7 partitions # /dev/sdb1 /f7boot ext3 defaults 0 0 /dev/VGa2/LVa2 /a2 ext3 defaults 0 0 /dev/VolGroup00/LogVol00 /f7 ext3 defaults 0 0 The disk I want to remove is /dev/sda which is (mostly) that /f7 mount point /dev/VolGroup00/LogVol00 (and also some of the swap). The two drives I'm leaving are currently /dev/sdb and /dev/sdc. I can see if all is well in terms of the contents of the drives by simply removing the two lines from /etc/fstab and rebooting, that will check that there's nothing needed for the system to run on /dev/sda. However will the resulting changed names of the underlying physical drives that (I presume) will occur when I remove /dev/sda cause any problems? I.e. will it stop the system booting/running? If so would it just be a matter of booting off a CD and going into single user mode to sort things out or is it messier than that? -- Chris Green

2 2

copy and paste facilities
by Barrys linux mail 10 Oct '08

10 Oct '08

Hi I dont seem to be able to copy and paste text from firefox3 into Open office word as i can with windows. installed a clipboard program called glipper but still cannot copy and paste.I really need something with a graphical interface as i am not too good using commands etc. has anybody got any ideas on a program that will do this copy and paste for me? Barry

3 3

To install "stright-through" via CUPS??
by Ted.Harding＠manchester.ac.uk 10 Oct '08

10 Oct '08

Hi Folks, Confession: I've never had much luck with CUPS (as opposed to the old lpd system which I could get dancing to any tune)! Anyway: My printer is a PostScript-endowed HP 1300. I only ever produce PostScript files for printing. Therefore, I just want to be able to send the PostScript stream straight-through to the printer, i.e. not using any drivers. But when I try to set this up on CUPS (Gnome interface) it insists on going through the Maunfacturer/Driver routine. I've tried "Generic PostScript", and also "Apple Laserwriter II", installing PostScript drivers from the foomatic list. But the result is that, when I do 'lpr filename.ps', the printer starts printing reams of sheets with a single line of garbage on each. Don't ask me why! There's a complication, in that here I'm running Linux in VirtualBox on Vista, so there may be interference from Vista; but if I could get "straight-through" set up I think I should be OK. So, Question: How to set up straight-thorough in CUPS? With thanks, Ted. -------------------------------------------------------------------- E-Mail: (Ted Harding) <Ted.Harding(a)manchester.ac.uk> Fax-to-email: +44 (0)870 094 0861 Date: 09-Oct-08 Time: 15:30:38 ------------------------------ XFMail ------------------------------

2 1