main

main@lists.alug.org.uk

10372 discussions

New system, almost perfect but some X/Video questions
by Chris G 08 Oct '08

08 Oct '08

So I ordered my new system (in bits) from Lambdatek over the weekend and it all arrived on Tuesday which, considering it came in four batches via four different carriers is pretty good. It's an Asus P5Q-VM motherboard, Intel quad core processor and 8Gb of memory with all other bits 'generic'. Ubuntu 8.10 beta installed without any problem at all, which is a good start. However..... I sort of knew the Intel G45 graphics was probably a bit risky being so new, and I was right. To get it to run without X crashing I have to add 'Option "NoAccel"' to the device section of xorg.conf. It's a know problem and there is a fix out there which will appear in the Intel X drivers in due course. I don't really need the acceleration at the moment so I can wait. However there is another minor problem, I can't get as high a display resolution as I want, the maximum I'm offered is 1152x864 and I normally run 1600x1200. The display is actually capable of more than that I think. Currently I'm running the new (Ubuntu 8.10) system on the VGA input of my monitor and the old (Fedora 8) system on the DVI-D input of the monitor. I did try swapping them round but the the Ubuntu 8.10 system just failed to start video at all, I had to ssh into it to shut it down. It looks as if the display/screen detection in the Intel X drivers is completely broken. The display is a Dell 2001Fp and is detected without any problems by the Fedora 8 system. How can I tell the Ubuntu systems X configuration all about my display without too much hassle? Is there any utility which will interrogate the display and spew out xorg.conf configuration parameters? -- Chris Green

3 4

Linux Job
by Tracy Dickerson 08 Oct '08

08 Oct '08

Hello, I have just been sent this link as it might be of interest to people here. http://eadt.jobs24.co.uk/doc.html?_a=view&ctx=list&id=247400 Hope it is of help to someone. Tx

1 0

[ALUG Announce] 2nd Thurs Pub Meet 9th Oct
by Richard Lewis 07 Oct '08

07 Oct '08

ALUG Announce Please send announcements to Announce(a)lists.alug.org.uk Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce ----- Dear ALUG, The monthly second Thursday social meeting of ALUG will take place on * Thursday 9th October * at The Reindeer (10 Dereham Road, Norwich, NR2 4AY). It's very near the junction of Dereham Road and the Norwich inner ring road (Grapes Hill) and serves a selection of real ales, bar snacks, and hot drinks. Things normally start around 20:00 (though sometimes people are there earlier). New comers and old goers welcome! Cheers, Richard -- -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Richard Lewis JID: ironchicken(a)jabber.earth.li http://www.richard-lewis.me.uk/ -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- +-------------------------------------------------------+ |Please avoid sending me Word or PowerPoint attachments.| |http://www.gnu.org/philosophy/no-word-attachments.html | +-------------------------------------------------------+ ----- Send discussion replies to main(a)lists.alug.org.uk (Reply-To set) Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce

1 0

Any ODBC experts here (connecting Access to mySql)
by Chris G 05 Oct '08

05 Oct '08

I managed something similar to this once before but now I can't make it work again. I want to export some Access database tables to mySql. I am trying to use ODBC. It's all installed and set up in my Windows machine (Vmware). In the "ODBC Data Source Administrator" the connection I have set up to the mySql database tests OK. However when I try to Export from my Access database I get a pop up box saying:- [MySQL][ODBC 3.51 Driver]User cancelled A Google search for this error doesn't reveal much of help. I've tried turning on the logging for the ODBC connection and I'm none the wiser really. What I can't really understand is that when I do the export it doesn't allow me to select the database to export to, how can it do an export of a table without knowing the database name? If I click on the Database pull-down in the export configuration it says "Loading database list not implemented for SQLDriverConnect()". Any ideas anyone? -- Chris Green

1 1

linux alternative to file shredder
by Barrys linux mail 04 Oct '08

04 Oct '08

Hi. As I am in the process of moving completely from xp to Ubuntu Linux I wondered if there is a Linux alternative for my windows file shredder software ( which will overwrite files several times to make them unrecoverable). as I have been stumped on replacing this program which I value greatly as a security item. Thanks Barry

7 12

What I actually bought
by Chris G 03 Oct '08

03 Oct '08

Well after faffing around for 24hrs or so I've ordered a system in bits from Lambdatek. I decided to go for an Intel G45 based system which might be a little bit "too new" for safety but what the heck. It's an Asus P5Q-VM motherboard, core 2 quad processor, 8Gb RAM, 500Gb disk drive, £473 (incuding a few more bits I haven't listed). I *nearly* ordered from efficientpc.co.uk but in the end the above system just about beat them to it. -- Chris Green

1 0

Where to buy basic system unit for Linux? (Chris G)
by Peter Alcibiades 03 Oct '08

03 Oct '08

I used to use Komplett, who were brilliant, but how about Novatech as an alternative? Peter

2 1

Where to buy basic system unit for Linux?
by Chris G 03 Oct '08

03 Oct '08

Does anyone have recommendations for buying a reasonable base unit (i.e. no screen/keyboard/mouse/etc.) I think I'd prefer an 'all Intel' system as that's any easy way to be (fairly) sure it will all work in Linux (though I'm willing to listen to alternatives). I want something like - desktop/tower system, intel core two quad processor, 4Gb RAM (with space for more), 500Gb or thereabouts hard disk. My last system was a 'select the bits yourself' custom build from Komplett but they no longer exist. A company like them would be good. -- Chris Green

9 17

Linux PVR boxes
by Mark Rogers 01 Oct '08

01 Oct '08

Does anyone have any knowledge/experience of commercially available Linux PVRs, such as http://www.darkbox.co.uk http://www.dreambox.org.uk A customer asked me about them as his "Linux guru" (a title I really don't live up to!) and I'd not heard of either of them. -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0845 45 89 555 Registered in England (0456 0902) at 13 Clarke Rd, Milton Keynes, MK1 1LG

4 12

Installing NX on a headless remote server
by Mark Rogers 30 Sep '08

30 Sep '08

Is there any reason why I should not be able to install NX (www.nomachine.com) on a remote server (to which I have root access)? If I try to install using dpkg and "apt-get -f install" to resolve dependencies I'm getting connection errors which I am pretty sure relate to there being no X server installed. What would be the minimum I need to do to get X installed so that this would work (assuming my guess is correct)? What I am trying to do is reach the point where I can connect to a box in a remote office and use (eg) Firefox on the box to view locally hosted web pages, although once I have remote access to a "desktop" there are other ways I could (ab)use that. -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0845 45 89 555 Registered in England (0456 0902) at 13 Clarke Rd, Milton Keynes, MK1 1LG

3 8

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main