main

main@lists.alug.org.uk

10364 discussions

[OT] SD card not fully recognised
by Bev Nicolson 10 Feb '22

10 Feb '22

I got a Lenova tablet (Android 10) not long ago, mostly to read e-books on. I also got an sd card for it but it seems only settings recognises it, not the file manager app. I shall run out of storage space soon. (Much of it is taken up by the OS.) Thoughts? Ideas? Bev.

1 0

pdf viewer - evince
by Bev Nicolson 03 Feb '22

03 Feb '22

The background is this. Suddenly document viewer wasn't in the list of options to open a pdf a while back. I've always used Evince so I found and installed it. All was well, but now it only shows the Adobe logo, not the front page of the pdf. How do I fix that, and is it connected to the fact that Mint doesn't seem to have an up to date version of it? (It used to just be a case of renaming the file but this doesn't work any more.) Bev

4 6

Tool(s) for processing text file line by line using state etc.
by Chris Green 21 Jan '22

21 Jan '22

I'm looking for tools (if there are any) for processing a text file line by line sequentially. As it goes through the file it needs to make decisions based on the contents of the line(s) of text and change its state as it goes. The decisions it makes depend on the state it's in. Basically I'm processing some (fairly) fixed format messages from a forum to remove some matched header and trailer lines, modify and output a few other matched lines and simply output the body of the message. The (most) difficult bit is removing blank lines before something. E.g. we have a message that starts:- A new topic has been created on the forum Message Subject : weed webinar 31 January Category : Waterways Continental Europe Posted by : Fred Bloggs I want to delete everything up to and including the blank line after 'Message Subject' then keep (i.e. output) the 'Category' line and the 'Posted by' lines without the blank lines in between. I can't delete all blank lines because I want to retain spacing in the message body later. So I need to be able to do things like deleting blank lines unless I am in the message body. Are there specific tools for doing this sort of thing or should I just write a program (probably in Python) that reads lines, does actions as required and remembers its state as it goes? I got some of the way using sed but it's very difficult to 'delete the line before XXXX' with sed. It *might* be that awk would be better but I don't see it handling the state/sequential bit any better than sed. Any/all advice would be very welcome. -- Chris Green

3 2

boot log messages
by Phil Thane 13 Jan '22

13 Jan '22

Hi, Does anyone understand the boot process well enough to know if this is important? During boot I see a lot of errors but they scroll past to fast to read so today I actually view the log and find messages in red such as: Jan 13 11:32:06 phils kernel: xhci_hcd 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0010 address=0xbea0a740 fl> and Jan 13 11:32:06 phils kernel: AMD-Vi: Event logged [IO_PAGE_FAULT device=02:00.0 domain=0x0010 address=0xbea0a740 flags=0x00> There are a lot but the numbers seem repeated so maybe it's just several attempts to find something before giving up. I'm on Mint and the Mint forums suggest it might be a mismatch between the number of USB expected and those actually found, I guess that'd be a motherboard fault though the ports I use all seem to work. Should I worry? -- Phil Thane www.pthane.co.uk Tweet @pthane 01767 449759 07582 750607

1 0

Quick and Easy External Displays for Raspberry Pis etc.
by Steve Mynott 10 Jan '22

10 Jan '22

Occasionally one of the RPs crashes and since it's headless I can't see why it's rebooting. It's always awkward to put a full screen display on it. Can anyone recommend a small LCD screen (maybe 1024x768 or 800x600) with HDMI to use? Alternatively I've a number of retro systems which use RCA, Scart, VGA etc. and had a lot of success with early gen LCD screens (12"/14") cheap from car boot sales for around 10-20 quid. Although they usually have loads of ports, I've never seen any with HDMI. Do these exist? Or is any sort of cable/converter possible? I think I used to be able to use DVI as HDMI (?) But I've not seen DVI on these either. -- Steve Mynott <steve.mynott(a)gmail.com> rsa3072/629FBB91565E591955B5876A79CEFAA4450EBD50

3 2

Reducing size of pdf's
by Bev Nicolson 07 Jan '22

07 Jan '22

How do I reduce the size of a pdf without a) meaning I have to unzip to read it or b) shrinking it so the pages appear blank? I doubt I'll need to do this often but I'd welcome some pointers. Ghostscript is installed. I have just tried one option found by googling and got the second result. Not ideal. (Mint. 19.1 iirc.) Bev

2 2

List server upgraded
by Jonathan McDowell 30 Dec '21

30 Dec '21

I've upgraded the server running lists.alug.org.uk to Bullseye (Debian 11) and that has finally forced me to move from mailman2 to mailman3. Hopefully things are back up and functional again, but let me know if you see any list oddities. Getting the wiki back up on www.alug.org.uk is going to take me a little longer, but hopefully within a few days. Moin is still Python2 only and no longer part of Debian. J. -- ... Do you believe in happy endings?

1 1

None
by None 29 Dec '21

29 Dec '21

1 0

None
by None 29 Dec '21

29 Dec '21

simply a nuisance that confuses things. With my more technical hat on they are something which is difficult/impossible to implement correctly because there is no concise explanation anywhere of what they're supposed to do. ... and the same sort of problems apply to INBOX! [moan, moan, moan, mumble, mumble] -- Chris Green (chris(a)areti.co.uk) "Never ascribe to malice that which can be explained by incompetence."

1 0

None
by None 29 Dec '21

29 Dec '21

on the network; "get" or "put" the file[s] you want to transfer between Windows and Linux. This last is what I mostly do when someone sends me a Word or Excel attachment. In the latter case, I will typically export it (in Windows) as a ".csv" file which I can then tranfer back to Linux in order to run proper software on it! You can of course use the Windows telnet client as well (or the better one called "putty"). VMWare has given me a smooth interface to Windows when I need it, enabling me to continue to run Linux without re-booting. As someone remarked, it {will | would} be great {when | if} some good soul {gets | got} round to implementing something with similar power as OSS. But I can't begrudge the cost. It's been well worth while. (Of course, more recent versions of VMWare should be free of limitations such as I refer to above). Best wishes to all, Ted. -------------------------------------------------------------------- E-Mail: (Ted Harding) <Ted.Harding(a)nessie.mcc.ac.uk> Fax-to-email: +44 (0)870 094 0861 Date: 02-Mar-05 Time: 14:11:03 ------------------------------ XFMail ------------------------------

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main