- main - earth.li

DNS go bye-bye
by Bill Hill 18 Mar '16

18 Mar '16

This is the third time I've been unable to log out; the problem: $ cat /etc/resolv.conf # Generated by NetworkManager $ Any ideas why? (NB, this is a really complex setup consisting of an archaic item of technology termed a "network cable" and a very non-standard configuration of a "fixed IP address".) Once is an accident. Twice is coincidence. Three times is an enemy action. $ sudo apt-get purge network-manager

2 1

Customising a Pi image
by Mark Rogers 17 Mar '16

17 Mar '16

This is really just a sanity check! Background: The current standard Pi Rasbian image is 3.8GB in size. If I write that to (say) an 8GB card it'll only give me access to that 3.8Gb until I resize the partition (for which Raspbian includes scripts). Assume I *don't* do that resize. I set things up the way I want on the Pi, and I then want to create a new image of the SD card to restore to another card (possibly a different size). "dd" will get me an 8GB image by default (since it's an 8GB card) but am I correct that I can safely limit the image to the exact size of the original Rasbian image? The objective here is that (a) writing a 3.8GB image to a new card is much faster than writing an 8GB image, and (b) that it will safely write to any 4GB/8GB/16GB/etc card (where an 8GB image might not fit on a different model of 8GB card). The third benefit (c) of a smaller image is less of a concern as I can compress it anyway and unused space should pretty much disappear that way. -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0844 251 1450 Registered in England (0456 0902) 21 Drakes Mews, Milton Keynes, MK8 0ER

2 2

Automatically selecting the best wifi adapter
by Mark Rogers 17 Mar '16

17 Mar '16

The new Pi 3 has built in Wifi, great! But it'll never be as good as a USB adapter with proper antenna, although it might often be sufficient. Out of the box, if I connect it to wifi using the onboard adapter and then add a second USB adapter is connects the second one in tandem (ie both connect to the same network and get distinct IP addresses via DHCP). This is a waste of DHCP allocation resources and (correct me if I'm wrong) could cause routing issues? What I'd like is to have the Pi use the built in adapter if that's the only one present but switch to the added adapter if one is present (and working[1]), switching back to the on-board one otherwise. None of this is Pi-specific of-course, the same would apply to any laptop with built in adapter where an additional dongle might be used periodically. However my Googling has so far only thrown up more permanent solutions, and not automatic switching between them. [1] Ideally it would fail over to the onboard adapter if the USB one wasn't reliable, but I'd settle for it always using USB if present, and onboard otherwise. I'm guessing I should be able to detect the arrival/departure of wlan1 and use it to enable/disable wlan0? -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0844 251 1450 Registered in England (0456 0902) 21 Drakes Mews, Milton Keynes, MK8 0ER

1 0

DNS Provider
by Karl Foley 14 Mar '16

14 Mar '16

I have a simple .co.uk domain that I currently have with Daily Internet that is due for renewal shortly. This domain is just for home use and just hosts a single A record pointing to my home server, a few TXT records for SPF and DKIM, MX records and a few CNAMEs for my Google Apps account along with a few other CNAMEs for some simple locally hosted sites, and a redirect to a Blogger site. I'm quite happy to renew with Daily, though they, like Free Parking before them seem to have pushed their prices up quite a bit. So I would be prepared to transfer. Does the list have any recommendation for DNS providers please? ATB, Karl.

4 3

Running code on startup
by Mark Rogers 11 Mar '16

11 Mar '16

Simple question: Is there anywhere I can dump a script file that will cause it to get run on startup? System is Debian (actually Raspbian although it could apply to other Debian derivatives). On this occasion it has a GUI but I'm looking for something that would work in a GUI-less environment. Caveats: What I want to do is just copy a file there (eg dropping files onto the SD card of a Pi). I'm trying to keep things simple so ideally I don't want to edit any files, which means appending to rc.local is out, for example. I tried creating /etc/cron.d/mystuff with @reboot root /root/mystuff.sh .. which works fine on reboot but doesn't run from any other startup, so not what I need. I'm thinking about creating a script for /etc/rc.d and also creating all the symlinks manually that would otherwise be created by update-rc.d, but that's messy. It seems odd that there isn't a /etc/rc.local.d directory (or similar) which automatically runs all scripts present at the end of rc.local, but unless I'm missing something there isn't any such approach. (Background: I want a simple way to configure a Pi (or similar) by writing the latest Raspbian image to a disk then extracting a tar file of my changes over the top. I want to supplement existing files rather than replace any that could obviously change between Raspbian versions.) -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0844 251 1450 Registered in England (0456 0902) 21 Drakes Mews, Milton Keynes, MK8 0ER

5 13

Satnav updates
by James Freer 07 Mar '16

07 Mar '16

Just wondering what folk use. One can use the Garmin/Express updates on windows but I was thinking of a way in Linux. I gather one can use a VM but then also have a windows version after Vista in order to do so. The only way I have found is to use maps from Openstreetmap.nl and copy to a mini SD card. Seems ok but not as good as Garmin/Express - is there a better way using linux. james

5 16

APC UPS and Ubuntu
by Mark Rogers 07 Mar '16

07 Mar '16

I had a couple of power cuts yesterday so today I have installed an APC UPS. Connecting the USB cable to my Ubuntu PC has given me a battery icon showing status so everything "just works" without messing around installing nut or anything similar, which is what I was expecting to do. However: I have two PCs being protected by the same UPS, the second being a Win10 box. I was expecting to use something like nut to share the status between the two boxes so both will shut down on low battery. Given that "it just works" so far, I'd like to supplement the existing config rather than replace it. Anyone here done something similar or know where I should start? Mark -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0844 251 1450 Registered in England (0456 0902) 21 Drakes Mews, Milton Keynes, MK8 0ER

2 2

[ALUG Announce] ALUG Norwich Pub Meet Thursday 10th March
by Viperfang 07 Mar '16

07 Mar '16

ALUG Announce Please send announcements to Announce(a)lists.alug.org.uk Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce ----- Hello Norwich Aluggers, Our monthly ALUG Norwich social meeting will be held this Thursday, 10th March at The Coach and Horses (82 Thorpe Road, Norwich, NR1 1BA). The meeting officially starts at 8pm, although some people may arrive earlier. More information on those people can be found on the list and the IRC channel. If you are unsure if you will recognise us then make yourself and your intent to attend known by either posting on list or visiting us on IRC so we can look out for you rather than hiding in the corner. Optionally you could ask at the bar if they know where the geeky computer weirdos are and they'll point you in the right direction (seriously!). Another possibility is look for heaps of electronics on a table that may possibly look like movie props that would used for detonating explosives. Feel free to bring electronics/laptops/gadgets to the meet, you will by no means be alone. Ben Bewick aka Viperfang NB: This mail is automated, please refer to the usual sources for more information. ALUG Contact Details: Website : http://www.alug.org.uk/ IRC : #alug on irc.alug.org.uk List : http://lists.alug.org.uk/mailman/listinfo Twitter : http://twitter.com/anglianlug Identica: TBA Facebook: http://www.facebook.com/group.php?gid=2381613902 ----- Send discussion replies to main(a)lists.alug.org.uk (Reply-To set) Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce

1 0

Software for the blind.
by Nev Young 04 Mar '16

04 Mar '16

Our erstwhile companion Mr Anson is currently wired to machines that go ping in the cardio ward of the local hospital and has asked if I could put the following to the knowledgeable folk of ALUG. Could any body comment on the availability of a good Linux speech-operated program to suit a totally unsighted person. Thanks Nev on behalf of Tony.

3 2

How to timeout a process after inactivity?
by Chris Green 04 Mar '16

04 Mar '16

I want to close an editor window (it's vile a vi clone, but something that works for vim would work with vile) after some minutes of inactivity. It's a security thing, I have a nice wrapper script that allows me to 'transparently' open and edit files encrypted using GPG but I want it to automatically close the editor window after a few minutes of inactivity. Currently I use the following in the wrapper script just before starting the editor:- # # # time ourselves out after five minutes by typing ZZ in the window # (sleep 300; xdotool type --window $WINDOWID ZZ >/tmp/log 2>&1) & This works OK but has some problems:- It doesn't work when used via SSH because xdotool is using X and there's no WINDOWID. It will *always* send a ZZ to the window five minutes after being started, even if I've exited from the editor. Can anyone suggest a better way of doing this? Ideally it should detect activity in the editor and only shut it down (or kill it) if there is no activity. -- Chris Green

1 0