OK, thanks for the heads up. I'll buzz the cable out before I start.
I do recall laplink cables that worked on older parallel ports by using the handshaking pins rather than the (non-bidirectional) parallel pins so this isn't a surprise, although I'd hope that any newer cable should use all the pins. But then I bought the cable from eBay so buyer beware etc!
On 24 April 2014 14:42, nev young nev@nevilley.org.uk wrote:
On 24/04/14 10:37, Mark Rogers wrote:
I've just ordered two USB/parallel adapters and a "laplink" cable off eBay to experiment with. Now that you mention it I might have an old Star dot matrix printer lurking somewhere (I think it may be long gone though). Although all I really need to do is set up a PC so it *thinks* it is talking to a printer and capture it from another PC (or the same PC on a different port),
Take care with "laplink" cables. Some are back to back cables that connect the d0-d7 signals directly (what I think you want) and some use the 4 data control lines connected to d0-d3 and special software to write nibbles.
http://en.wikipedia.org/wiki/Direct_cable_connection#DCC_with_Parallel_Port
Nev
main@lists.alug.org.uk http://www.alug.org.uk/ http://lists.alug.org.uk/mailman/listinfo/main Unsubscribe? See message headers or the web site above!