On 16/07/12 15:07, Mark Rogers wrote:
On 16/07/12 09:23, Mark Rogers wrote:
I'll get the output of lsusb once the box gets back to me, which should be today.
Output from lsb -v (for the device in question).
[snip]
Right given the storage controller is the one that drops off the bus and THEN you get block errors on the SD card connected to it....
I'd say most likely a hardware issue...either that or there is some compatibility problem with the SD cards you are using..the USB to SD card bridge is detecting it and failing rather ungracefully by falling off the bus.
Or finally if you have other things on USB and one of them is loading up the supply and the storage controller is glitching as a result.
Is there anything attached via USB that wasn't when it was in your office on initial tests ?