On Fri, Feb 16, 2007 at 11:47:58AM +0000, Barry Samuels wrote:
On 16/02/07 10:15:17, Eur Ing Chris Green wrote:
On Fri, Feb 16, 2007 at 09:42:57AM +0000, Barry Samuels wrote:
On 16/02/07 08:37:00, Eur Ing Chris Green wrote:
BTW I took a look at the Asus 5W HD manual and there are a couple of interesting little snippets:-
Under the JMicron IDE interface description it says "This connector does not support ATAPI devices", so you can't put CD (or DVD) drives on it I guess.
Yes I've seen that but it will boot and run from a Live CD on that interface and I have seen comments from other Linux users about trying to get CD/DVD drives working on that interface. So I'm not sure quite what it means.
The JMicron IDE has a CD/DVD drive on my Abit board and works OK so, as you say, one does wonder what they mean.
On my Abit the *Intel* interface BIOS pops up a message saying that the AHCI mode works only for disk drives and not for CD drives, maybe there's something like that in the mix somewhere.
Under the Intel IDE interface description it says "Install devices on this connector (PRI_IDE) first, then install on the JMicron IDE connector, ...".
The Intel interface had the DVD drive on it and the two hard drives on the JMicron so that should satisfy that requirement.
Maybe it wanted *two* devices on the Intel interface first so it was 'full'. Clutching at straws though! :-)
It would be useful if I could trace the problem to something that I had done. Then, at least, I would have a satisfactory explanation.
Yes, I understand that, it would give you a bit of confidence that you won't fall down the same hole again.