main July 2002

main@lists.alug.org.uk

61 participants
144 discussions

ALUG Helpline for stucj users
by Ben Norcutt 17 Jul '02

17 Jul '02

Yes putting peoples phone numbers isn't a great idea but we could use the YAC number I set up for publicity purposes ages ago or even sign up for a new one takes minutes online. This could be redirected via the web interface to people that want to help out on a daily/weekly rota. Cheers, Ben

1 0

UDMA100 problem solved
by Raphael Mankin 17 Jul '02

17 Jul '02

The problem I was having, that my machine hung in the BIOS when I added a UDMA100 disk is now solved. My primary disk did not like co-existing with anything else at all. I discovered this when I got hold of another old-style disk *and* swappped the IDE cable. Remove the old primary - all is fine; put it back - only one disk can be connected. All is now sweetness and light. -- Nothing propinx like propinquity. Mark Twain Raphael Mankin E-Mail: raph(a)panache.demon.co.uk ----------------------------------

1 0

A little knowledge can be a dangerous thing . . .
by Kelly Ash 16 Jul '02

16 Jul '02

OK, I've read...re-read...checked...double and triple checked...read yet again..and have outrun the men in the little white coats with butterfly nets *g* Now, I think I'm well into information overload. So much so that I can hardly remember what I read or looked into on the net at the beginning. Much of what I've run into has been fairly basic which was extremely helpful in my case! But...there are many references to things having to do with Linux that I really have no idea what they're talking about and it starts becoming frustrating. So, I'm thinking of backing off for a day or two and then doing a quick run-through of the info I have, and then finally installing on Saturday. I d just like to know if I'm going about this install the right way or should I delve even deeper into this foreign world *g* before even attempting the install?? I hope the answer is no, as I said, everything is starting to blur together. I've backed up everything I can think of to back up as I've had to completely re-install my system twice in a years time and wouldn't look kindly to having to do it again. I've another question...will Mandrake show me the drive sizes so I know the difference between hda and hdb? The drive I have solely for Linux is 20GB, completely empty and as of this moment, unpartitioned. I can't stress enough how much help you've all been up to this point, and thanks for not sending me to the "Reassurance Lounge". Kelly

7 15

Re: [Alug] USB and SMB
by Douglas Willis 16 Jul '02

16 Jul '02

Run lsmod as root and check that the usb-storage module is loaded. If it is not then run 'modprobe usb-storage' to install it. You should be able to access the drive as a scsi device. ( /dev/sda assuming that you have no other scsi disks on your system ) Check in the /proc/scsi/scsi file to see if the USB device is now visiable as a mas storage device. > The next problem is USB. I have a USB Compact Flash card reader hung off the > machine and am trying to read the JPEGs on it but again, I can't connect to > the device. The machine says that USB is installed and indeed I see that usb > shows 97 items under /dev/usb but none appear to be drives, only files so > -- Douglas Willis (ddw(a)nerc-bas.ac.uk) British Antarctic Survey High Cross, Madingley Road Cambridge, CB3 0ET, United Kingdom tel: +44 1223 221400, fax: +44 1223 362616

1 0

SuSE 8, Network server and outside interfaces.
by Emmstah 16 Jul '02

16 Jul '02

Hi, Just installed a fresh copy of SuSE 8 Professional edition (I previously used 7.1 on main box and 6.4 on server), got Apache, FTP running et all, however it is only reachable by the internal network (eth0), and any attempts to reach the server from the outside network (ppp0) result in a time out. Trying from my main box inside the network results in the appropriate test page. I've checked inetd.conf, hosts/.deny/.allow, which all seem to be in order, and I am now officially stuck. Any suggestions as where to look next would be greatly appreciated :) Many Thanks, Emma

2 1

Re: [Alug] SuSE 8, Network server and outside interfaces.
by Emmstah 16 Jul '02

16 Jul '02

Hi, the routing table is as follows (sorry about formatting) Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface srv1.cmbg.uk.me * 255.255.255.255 UH 0 0 0 ppp0 192.168.8.0 * 255.255.255.0 U 0 0 0 eth0 default srv1.cmbg.uk.me 0.0.0.0 UG 0 0 0 ppp0 Also re: Ricardo, As I have said, I previously had SuSE 6.4 on this box with an ftpd and httpd running without problems, so I am certain its something strange SuSE has changed in the configurations. I guess if the worst comes I can use my old 7.1 dvd, but I want crack this on the head and learn more. But then again I'm not too experienced with Linux configurations so I could be talking out of my ass :) Emma At 13:17 16/07/2002 +0100, you wrote: >Emma wrote: > >Any suggestions as where to look next would be greatly appreciated :) >What does your routing table say? >Jen. >PS. Has anyone noticed my enthusiastic posting today?

1 0

Re: [Alug] SuSE 8, Network server and outside interfaces.
by Ricardo Campos 16 Jul '02

16 Jul '02

> PS. Has anyone noticed my enthusiastic posting today? Is the boss on holiday? ;) Back to the point, I notice it's on ppp0, which I take to mean it is either dial-up or broadband. AFAIK some ISP's firewall off their customers to stop people running SMTP servers and the like that act as relays and get the whole network blacklisted (Demon?). They might also block off web services too. Just a thought. Ricardo -- Get your free email from www.linuxmail.org Powered by Outblaze

1 0

Re: [Alug] SuSE 8, Network server and outside interfaces.
by Jenny_Hopkins＠toby-churchill.com 16 Jul '02

16 Jul '02

Emma wrote: >Any suggestions as where to look next would be greatly appreciated :) What does your routing table say? Jen. PS. Has anyone noticed my enthusiastic posting today?

1 0

Re: [Alug] A little knowledge can be a dangerous thing . . .
by Jenny_Hopkins＠toby-churchill.com 16 Jul '02

16 Jul '02

Kelly Ash wrote: >But...there are many references to things having to do with >Linux that I really have no idea what they're talking about and it starts >becoming frustrating. Kelly - allow this all to soak up like a sponge without understanding it, and one day it will fall into place and become useful. There's no way it all falls into place at first. I do this with everything now, I flounder about just trying to absorb, and let it take its course. Then a year later I'll go "oh, *that* was what that linked library file stuff was about!". (Well, I have still to go like that in this particular instance, actually). The hda/b thing - I think it's pretty clear what the partitions are. Are you dual booting with your win computer? It's a pity you haven't got an old box to have a practise install on so you don't worry about losing anything important. Jen.

1 0

Re: [Alug] UDMA 100, etc.
by Jenny_Hopkins＠toby-churchill.com 16 Jul '02

16 Jul '02

Syd Hancock wrote: >Jenny >You might like to check out Freesco - a router/firewall/dns server/etc >linux distro on a single floppy disk. Syd: thanks, I hadn't heard of this. It looks ideal. Would you recommend a download from the Freesco page, or is it best to install from the cd? >I have it on a massively over-powered machine - a 50mhz 486 with 16 megs of >ram and a hard-drive and it works very well although AFAIK it can be used >with a 386, 8 megs ram and no harddrive. > >If you are interested in trying it out I have another old 486 in the shed - >may need some memory though. > >Regards >Syd Ideally I'd like a better computer to run linux as a desktop on, and use the current old one as the firewall. I don't know if funds will allow for this, I'll see how my bid on QXL for a computer goes (It didn't stay a quid for long!) http://www.qxl.com/cgi-bin/qxlhome.cgi/EN/QXL/PR/U1014887477/_33394770 or try and persuade work I need one at home to learn important stuff to enhance the company on :-) Given the possibility that both of those are highly likely to fail, I may well get back to you on that kind offer! Thanks, Jenny.

1 0

← Newer
1
...
5
6
7
8
9
10
11
...
15
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main July 2002