main

main@lists.alug.org.uk

10372 discussions

Change of email address
by ted.harding＠wlandres.net 30 Sep '10

30 Sep '10

Sending this for the benefit of any you who may have my existing email address (ted.harding(a)manchester.ac.uk) in their address-books. Apologies to all others to whom this may be irrelevant! Since Manchester University seem to have decided that retired persons no longer contributing to research in a Department shall no longer keep their email accounts, my existing email address will cease to function shortly. I have set up a new email address which is: ted.harding(a)wlandres.net (Ted Harding) The existing one (ted.harding(a)manchester.ac.uk) will still work for a week or two (possibly longer). If you have my existing email address in your addressbook, please update it to the new one. This message is being sent from the new address, so you may simply be able to derive the new entry directly from that (using some "add to address book" function). Thanks, Ted. -------------------------------------------------------------------- E-Mail: (Ted Harding) <ted.harding(a)wlandres.net> Fax-to-email: +44 (0)870 094 0861 Date: 30-Sep-10 Time: 19:14:49 ------------------------------ XFMail ------------------------------

1 0

Re: [ALUG] Nvidia driver custom refresh rate
by Tim Green 28 Sep '10

28 Sep '10

On 28 September 2010 13:51, John Woodard <mail(a)johnwoodard.co.uk> wrote: > root@Trigger:/home/bj# apt-get install read-edid > Reading package lists... Done > Building dependency tree > Reading state information... Done > read-edid is already the newest version. > 0 upgraded, 0 newly installed, 0 to remove and 540 not upgraded. > root@Trigger:/home/bj# read-edid > read-edid: command not found > root@Trigger:/home/bj# According to http://packages.ubuntu.com/lucid/read-edid, the command line tools are get-edid and parse-edid. Tim.

1 0

Nvidia driver custom refresh rate
by John Woodard 28 Sep '10

28 Sep '10

Hi All, I'm normally pretty adept at figuring things out but this one has me stumped. Googling has sent me down many alleys most of them blind. I have 2 identical machines one with Ubuntu 10.04 the other with Windows 7 Ultimate. The run through a KVM switch to the same monitor using their on-board Nvidia Geforce 6100 graphics adapters. The monitor is a cheapo AOC 24" TFT panel which is adequate for my purposes, mainly general office stuff, accounting, surfing, email etc. This monitor is weird in that it requires a refresh rate of 61Hz rather than a standard 60Hz to give a steady display at its native resolution 1920x1200. In the Nvidia control panel in Windows it is easy to set a custom refresh rate, so no problem and a nice display. Ubuntu 10.04 however using the current proprietary driver from the Ubuntu repositories does not have the same facility, unusable display so dropping back to a non native resolution for the monitor is the only way to use the GUI. Back in the day you used to be able to hack your /etc/X11/xorg.conf file and insert a new modeline to facilitate this but as far as I can tell this has no effect with the current incarnation of the Xorg server. I suspect the monitor is not outputting its configuration, data or something. I have removed the KVM switch and the problem still remains so it isn't that blocking the data from the monitor reaching the driver. Can anybody enlighten me on how to manualy do this and get the proper 1920x1200 resolution working @ 61Hz rather than the sole 60Hz option allowed by the Nvidia control panel? Cheers, BJ

2 1

Xmodmap Help
by Krishna Birth 24 Sep '10

24 Sep '10

Firstly please note that all k / K letters on this posting are altered to क / क (spiritual reasons.) I am sorry to thrust this project to you (mailing list). I am looकing for advice or if you have the time to construct a कeyboard mapping. There seems to be some problem regarding "if you assign Mode_switch and ISO_Level3_Shift to different keys, you can assign up to six characters to one key!" see http://tr.opensuse.org/SDB:Using_the_Extra_Keys_on_the_Keyboard The diacritics are usually typed with non-diacritic letter. It would be nice to have facility to use both in convenient way e.g. toggling with a Fonts / Scripts कey by permanently turning the Caps Locक to a Fonts / Scripts कey. Could this be done - When this Fonts / Scripts कey is pressed with a letter कey it toggles to diacritic letter 1 or 2 or 3 (depending on how many diacritics are there connected with a 'target' letter) - this toggling will need to factor in a 'remain at same spot' and toggle these diacritics feature. When the Fonts / Scripts कey is released then the cursor would move to the next base. Here are the target letters, the diacritics connected with them and the URL with more info about them: A Ā = http://www.fileformat.info/info/unicode/char/0100/index.htm a ā = http://www.fileformat.info/info/unicode/char/101/index.htm D Ḍ = http://www.fileformat.info/info/unicode/char/1e0c/index.htm d ḍ = http://www.fileformat.info/info/unicode/char/1e0d/index.htm H Ḥ = http://www.fileformat.info/info/unicode/char/1e24/index.htm h ḥ = http://www.fileformat.info/info/unicode/char/1e25/index.htm I Ī = http://www.fileformat.info/info/unicode/char/12a/index.htm i ī = http://www.fileformat.info/info/unicode/char/12b/index.htm L Ḷ = http://www.fileformat.info/info/unicode/char/1e36/index.htm l ḷ = http://www.fileformat.info/info/unicode/char/1e37/index.htm L L̐ = http://pastehtml.com/view/1az9crq.html - http://bit.ly/doq30H l l̐ = http://pastehtml.com/view/1az92sb.html - http://bit.ly/chipOw M Ṁ ̇= http://www.fileformat.info/info/unicode/char/1e40/index.htm m ṁ = http://www.fileformat.info/info/unicode/char/1e41/index.htm N Ñ = http://www.fileformat.info/info/unicode/char/d1/index.htm n ñ = http://www.fileformat.info/info/unicode/char/f1/index.htm N Ṇ = http://www.fileformat.info/info/unicode/char/1e46/index.htm n ṇ = http://www.fileformat.info/info/unicode/char/1e47/index.htm N Ṅ = http://www.fileformat.info/info/unicode/char/1e44/index.htm n ṅ = http://www.fileformat.info/info/unicode/char/1e45/index.htm R Ṛ = http://www.fileformat.info/info/unicode/char/1e5a/index.htm r ṛ = http://www.fileformat.info/info/unicode/char/1e5b/index.htm R Ṝ = http://www.fileformat.info/info/unicode/char/1e5c/index.htm r ṝ = http://www.fileformat.info/info/unicode/char/1e5d/index.htm S Ṣ = http://www.fileformat.info/info/unicode/char/1e62/index.htm s ṣ = http://www.fileformat.info/info/unicode/char/1e63/index.htm S Ś = http://www.fileformat.info/info/unicode/char/15a/index.htm s ś = http://www.fileformat.info/info/unicode/char/15b/index.htm T Ṭ = http://www.fileformat.info/info/unicode/char/1e6c/index.htm t ṭ = http://www.fileformat.info/info/unicode/char/1e6d/index.htm U Ū = http://www.fileformat.info/info/unicode/char/016a/index.htm u ū = http://www.fileformat.info/info/unicode/char/16b/index.htm Referring to the above 32 diacritics, in theory a diacritic letter could have up to 7 diacritics 'sign' variations per letter: 1. Macron 2. Dot Below 3. Candrabindu 4. Dot Above 5. Tilde 6. Dot Below & Macron 7. Acute and 2 diacritics 'case' (lower/upper sizes) variations per letter - in 'total' up to 14 diacritics variations altogether per letter In actuality, the maximum letter n/N has 6 diacritics sign/case variations and a/A only has 2 diacritics sign/case variations. Thus if you can turn the Caps Locक into a Fonts / Scripts कey that can allow up to 7 diacritics variations using this toggle approach: Fonts / Scripts कey press + letter कey tap once = diacritic letter 1st variation (sign/case) Fonts / Scripts कey press + letter कey tap twice = diacritic letter 2nd variation (sign/case) Fonts / Scripts कey press + letter कey tap thrice = diacritic letter 3rd variation (sign/case) Fonts / Scripts कey press + letter कey tap four times = diacritic letter 4th variation (sign/case) Fonts / Scripts कey press + letter कey tap five times = diacritic letter 5th variation (sign/case) Fonts / Scripts कey press + letter कey tap six times = diacritic letter 6th variation (sign/case) Fonts / Scripts कey press + letter कey tap seven times = diacritic letter 7th variation (sign/case) The above does not require the case कey (arrow upwards) to be used because the above has both lower and upper letters. If you feel that 'case कey' producing upper case letters should be used just as it is with non-diacritic letters, then fine. Thus this would mean: - 50 percent variations of the above toggle with Fonts / Scripts कey press + letter कey tap for lower case letters, and - other 50 percent variation of the above toggle Fonts / Scripts कey press + letter कey tap + caps कey for upper case letters. "if you assign Mode_switch and ISO_Level3_Shift to different keys, you can assign up to six characters to one key!" see http://tr.opensuse.org/SDB:Using_the_Extra_Keys_on_the_Keyboard Does this mean it is possible? Could 7 characters to one कey be possible? Features to consider for the Fonts / Scripts कey development: 1. Toggle other कeyboard mapped layouts for example, languages and diacritics. 2. Access other fonts through toggling (Fonts / Scripts कey + another कey) without needing going every time to the particular application's micro layer. 3. Design more styles per letter and/or partner with other fonts and thus more styles on a font and accessing them through toggling (Fonts / Scripts कey + another कey) without needing to go to application's micro layer. It would be nice to have some person/s on board and get these things done. Best, Meeकu

5 11

Internet issue, exchange server - Ipswich
by Dalibor Zeman 22 Sep '10

22 Sep '10

Hi guys, I hope you will be able to help me, at least to explain what's going on. A few months ago I lost land line connection (currently in investigation whether it's internal/external problem with Orange as my provider - cannot make/receive calls). Probably in the same time my internet speed for download dropped from 6 MBits to 1MBits I have now. When I check other providers, all of them show the same speed for my location during testing procedure. Do you have any knowledge, info what's happening? Does anybody from my location have the same experience? I haven't used Google to search for this problem yet :-) My post code - IP4 2JL. Thanks in advance for your input. Dali.

3 4

Duplicity vs rdiff-backup
by Jon Dye 21 Sep '10

21 Sep '10

Hi all, I've used rdiff-backup in the past for backing up my home directories to a friend's server over ADSL. This works pretty well because rdiff-backup only ever sends the changes. I can delete all but the last 30 (or whatever) days of backups and it still always only sends increments. I've recently started trying to use duplicity as I wanted my backups to be encrypted so that users on the remote server can't see my data. I thought duplicity "builds on rdiff-backup and adds encryption" but I don't think it works the same. As far as I can see, if I want to delete backups older than say 30 days in duplicity I need to have a full backup newer than 30 days. This means at least once every 30 days I need to transmit all the data to the remote end. This takes me over 24 hours on ADSL. Does anyone know if I've got this wrong? Any other suggestions for backups that are *always* bandwidth efficient after the first full and are encrypted? JD P.S. I'm also going to ask on the duplicity list but I thought someone here might know.

1 1

Cli Case Management
by Richard Parsons 20 Sep '10

20 Sep '10

Hi, I'm a solicitor <ducks>, and would like to organise my work at the linux commandline, rather than using MS Office. I like cli apps; I like python; I like bash; I like concise; I like the unix philosophy; I like vim; I like Mutt. However, I don't get chance to use the software that I love at work. Instead, I'm expected to use Word, Outlook and some horrible case management software to manage my documents, and create them from templates. All day long I write letters and other documents on each of my legal cases. I would be exceedingly happy if I could replace this functionality with some nice scripts, so that I could spend my days in front of a nice bash shell. To do that I'd need a script that: 1. Stores data about a case: I need to be able to store some data (could be a simple key/value store for each case). 2. Store documents for each case: I'd like to store each document I produce along with some information on that document (such as how long it took to prepare). If I use a wordprocessor (such as openoffice) is it possible to quickly extract some 'properties' via a script? Would a better solution be to keep the documents in a text format, such as latex code...? 2. Enable templating: I could have a template document (e.g. a letter) and some of the information could be pulled out from the case data to populate it. I would then amend it for the particular circumstances of my case to then print, save etc. 3. Produce reports: I'd like to be able to scan all my cases to produce reports, such as: which case hasn't received any attention for the longest time, or how much work have I done on all my active cases this week etc. I recognise that these are probably separate problems that should be solved separately. However, I'd be grateful for any suggestions on how I might solve some of these parts. Thank you for any thoughts. Thanks in advance, Richard

4 5

Struggling to get my head around git
by Mark Rogers 20 Sep '10

20 Sep '10

I haven't quite got my head into the git mindset, and I've not really found a good overview which has "clicked". The situation I'm playing with is merging what are two seperate developments (branches?) of the same web application. One is a third party web application that progresses over time without my involvement, and the other is the version of the codebase which contains my own customisations. The application in this case is ZenCart (PHP based). Can someone guide me quickly through the points in the sequence below where I should brange, commit, merge, etc? 1. Install ZenCart-1.3.8a 2. Customise to create MyApp. (This customisation takes place over several months/years) 3. ZenCart 1.3.9f is released so I need to upgrade MyApp. 4. After merging, I have a 1.3.9f version of MyApp for testing. 5, Meanwhile, some development continues on the live 1.3.8a version of MyApp. 6. The 1.3.9f version of MySite passes testing, I now need to merge in the changes that took place in 5. 7. Test again, and if testing doesn't complete before more changes take place, go back to 5. 8. Testing complete, migrate to 1.3.9f version of my site as working copy. 9. Some time later, 1.3.10b is released and I want to upgrade again. 10. ... and so on.... I think where I am getting stuck is working out what should be the "master" branch and how to keep switching between branches as necessary. Indeed, I'm not even really sure how many branches I should have here? For anyone who saw my previous posts on this: I have successfully used git to achieve steps 1-4, which in itself is fantastic for me. However, I'm now in the situation that development on the live site has continued before the new version has been accepted, so now I have new changes to apply, and at the moment the only way I can work out to do it is to start from scratch which (a) I don't want to do as the merge was not straightforward, and (b) is clearly the wrong way to be doing it. When I started looking at it again, git status tells me that my test code is on branch "MyApp-1.3.8a", although it is the merged 1.3.9f version of the site code. Either I have done something wrong or I've chosen a bad name for the branch (it should probably just be "MyApp"?) but either way I'm in a muddle! -- Mark Rogers // More Solutions Ltd (Peterborough Office) // 0844 251 1450 Registered in England (0456 0902) @ 13 Clarke Rd, Milton Keynes, MK1 1LG

1 0

Flash part the second
by Bev Nicolson 19 Sep '10

19 Sep '10

It's that problem again. I now have Firefox 3.6.10 and flash still doesn't work but now it seems to be wobbling in Chrome too. I tried uninstalling it and installing again (using Synaptic) but now I suspect it must be broken. Anyone got any ideas? Bev.

1 0

[ALUG Announce] 3rd Monday Monthly Ipswich Social Meeting : McGintys, Northgate Street
by samwise 17 Sep '10

17 Sep '10

ALUG Announce Please send announcements to Announce(a)lists.alug.org.uk Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce ----- The monthly "Third Monday" ALUG Ipswich Social Meeting is back, Monday 20th September, at 20:00: P J McGinty & Sons 15 Northgate Street Ipswich Suffolk IP1 3BY Tel: 01473 251 515 Map/Directions URI: http://maps.google.co.uk/?q=IP1+3BY WWW: http://www.pjmcgintys.co.uk/ McGintys pub is in the centre of Ipswich. It's directly opposite the town's central library and has a reputation for good Irish beer. We're usually to be found in the lowest section of the bar, near the library entrance to the pub. All are welcome, novices and experienced users. Feel free to ask for further information on the Main ALUG mailing list. Hopefully, see some of you there! Peter. ----- Send discussion replies to main(a)lists.alug.org.uk (Reply-To set) Unsub, change settings via http://lists.alug.org.uk/mailman/listinfo/announce

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main