main

main@lists.alug.org.uk

10364 discussions

Anglian Developer Network?
by Paul Grenyer 02 Jun '10

02 Jun '10

Hi All I'm a software engineer at Validus on Princes Street in Norwich and have been an active member of the ACCU (www.accu.org) for nearly 10 years. While I was working for Lehmans at Canary Wharf I helped set up the London ACCU chapter. It continues to run monthly development related events, which usually take the form or a 60min presentation by a speaker. I think there are about 5 ACCU members in Norwich, which isn't really enough to setup a local chapter, but there are plenty of software companies (validus, virgin money, virgin wines, aviva, etc). So the reason I'm emailing you guys is to see if there's an appetite for doing something similar in Norwich..? Maybe quarterly to begin with. What do you think? How many here are developers? Thanks Paul

7 10

Why are lookups so slow?
by Chris Walker 01 Jun '10

01 Jun '10

My machine is a dual-boot i7 machine running on one side Windows 7 and here, Mandriva 2010 (64 bit). I've complained to my phone provider in the past about things slowing down after a period of a few hours so they changed the router. I now have a Huawei HG520b instead of the D-Link I had previously. I'd done a factory reset on that before swapping it out but then the new router arrived so I stuffed that in its place without testing the reset. With the Huawei, Windows will do lookups fine but Mandriva takes ages for everything, web searches, mail and so on. Sending this message sat there for ages doing a lookup for the smtp address before I cancelled it to add this. I *think* I've got both sides, Windows 7 and Mandriva, setup the same with DHCP for both IP address and DNS servers but is there anything I can try before I rip the Huawei out and put back the D-Link? TIA. -- __ __| |_ __ __ .----------------------------------------------. / _/ _` \ V V / | mailto:cdw_alug@the-walker-household.co.uk | \__\__,_|\_/\_/ |______________________________________________|

4 6

Re: [ALUG] PowerPC Linux
by Simon Royal 31 May '10

31 May '10

Hi Also, the burning problem with unsupported drives was generally only with iApps and Finder. Third party apps like Toast never had a problem. Simon -- http://twitter.com/SimonRoyal - http://www.tinyurl.com/macspectrum (sent using Sony Ericsson P990i)

1 0

Re: [ALUG] PowerPC Linux
by Simon Royal 31 May '10

31 May '10

Hi You dont need a specific firmware or drive to burn in OSX. You used to in early versions of OSX, but havent come across it is Tiger and upwards. You also used to have troubles booting from a non-Apple drive but even that is pretty obsolete these days. Simon -- http://twitter.com/SimonRoyal - http://www.tinyurl.com/macspectrum (sent using Sony Ericsson P990i)

1 0

how to do this? networking two interfaces?
by Peter Alcibiades 31 May '10

31 May '10

I have a case with two wired devices with network connections. Downstairs, we have a computer which is connected to an ADSL router via cable. Then, upstairs, there is going to be a networked printer. The problem is, running the network cable to connect this printer from upstairs into the router is not decoratively acceptable. Its an old house. So I have bought one of those little wireless usb adaptors, and we happen to have an old wireless cable router lying around. The idea would be, wire the printer into the wireless router upstairs, then talk to the wireless router over wireless from the usb adaptor in the computer downstairs. This would be two network connections from the same computer, one wired, the other wireless, with the wireless one going only to the printer, and the wired one going to the ADSL router for Internet access. This must be possible, you would think, but how do you set it up? I had intended to use homeplug, ethernet over mains, but the problem is that the two parts of this particular house are on different mains supplies with separate meters. Its an old house. Also, I can't move the ADSL router upstairs, because there are no phone sockets upstairs. They use cordless phones. So assuming its possible, the simplest would be wireless to the printer only. So this would be using eth0 for Internet access, and eth1 for printing only. Can you do this, and if so how? Peter

2 1

PowerPC Linux
by Simon Royal 31 May '10

31 May '10

Hi Does anyone have any experience with Linux on PowerPC Macs. Im a long term Mac user and have an iBook G3 which might not be the fastest machine in the world - a 500Mhz G3 with 640MB RAM, but compared to my ThinkPad which is a 300Mhz P2 with 296MB RAM it is a speed demon. I know officially Ubuntu stopped PPC ports in version 7, but community ports are still going strong. There is a PowerPC version of 10.04 although I havent tried it yet. I did try version 5 a while ago and it was pretty good. I also know there is no official support for Flash - although some claim to have it working and a lot of software that is for Ubuntu will only work with x86 devices and not PPC. PowerPC Linux is very thin on the ground, Ubuntu and Xubuntu seemingly the biggest two. Yellow Dog is another and there might be a Suse or Mandriva if I remember correctly. Is it worth pursuing? Is PPC Linux any good? Or should I ditch my iBook and my ThinkPad and get faster P2 or P3 machine. In the mean time I am going to try Ubuntu 10.04 for PowerPC on my iBook. Any help and advice would be appreciated. Simon Simon Royal --- Twitter: http://twitter.com/SimonRoyal - LowEndMac: http://tinyurl.com/macspectrum - Skype: Simon-Royal. --- IBM ThinkPad 600 running Ubuntu 10.04 & Apple iBook G3 running OSX 10.4. _________________________________________________________________ http://clk.atdmt.com/UKM/go/197222280/direct/01/ We want to hear all your funny, exciting and crazy Hotmail stories. Tell us now

3 4

Mint Linux
by Simon Royal 29 May '10

29 May '10

Hi I am quite liking Xubuntu at the mo, but I do have a habit of flitting from distro to distro. Ive been looking at Mint Linux and it looks great, a streamlined and polished Ubuntu. Is it just a fancy looking Ubuntu? Is it a cut down or lightweight version? Would it run better than Xubuntu? Simon --- http://twitter.com/SimonRoyal - http://www.tinyurl.com/macspectrum (sent using Sony Ericsson P990i)

5 4

Alphabetical sorting in EN-UTF8
by Ted.Harding＠manchester.ac.uk 28 May '10

28 May '10

Hi Folks, I have encountered a weirdness in alphabetical sorting. It originally popped up in an application, but experiment reveals that it arises from the Linux UTF8 collation system. First, check whether this may interest you by executing locale from the command line. If you see in the output: LC_COLLATE="en_GB.UTF-8" or similar, then read on. When I run the following commands (which you can mouse-copy into a concole for yourself) I get the results shown in the lines starting with "#" (you can copy these in too -- they will be ignored): sort << EOT "AACD" "A CD" EOT # "AACD" # "A CD" sort << EOT "ABCD" "A CD" EOT # "ABCD" # "A CD" sort << EOT "ACCD" "A CD" EOT # "ACCD" # "A CD" sort << EOT "ADCD" "A CD" EOT # "A CD" # "ADCD" >From the above, it would seem that in en_GB.UTF-8 the SPACE character " " is sorted to a position betwee "C" and "D", since "AACD", "ABCD" and "ACCD" all sort prior to "A CD", while "A CD" sorts prior to "ADCD"! That strikes me as completely nuts! I would welcome any comment about it. I have tried to track down where this is done, and to locate on my system (Debian Lenny, also occurs on earlier Debian Etch) any system file which defines the sort order (i.e. collation order) of the standard ASCII (and other) characters. All help and/or insight much appreciated! Ted. -------------------------------------------------------------------- E-Mail: (Ted Harding) <Ted.Harding(a)manchester.ac.uk> Fax-to-email: +44 (0)870 094 0861 Date: 28-May-10 Time: 20:57:48 ------------------------------ XFMail ------------------------------

2 2

PowerPC Linux
by Simon Royal 28 May '10

28 May '10

Hi Does anyone have any experience with Linux on PowerPC Macs. Im a long term Mac user and have an iBook G3 which might not be the fastest machine in the world - a 500Mhz G3 with 640MB RAM, but compared to my ThinkPad which is a 300Mhz P2 with 296MB RAM it is a speed demon. I know officially Ubuntu stopped PPC ports in version 7, but community ports are still going strong. There is a PowerPC version of 10.04 although I havent tried it yet. I did try version 5 a while ago and it was pretty good. I also know there is no official support for Flash - although some claim to have it working and a lot of software that is for Ubuntu will only work with x86 devices and not PPC. PowerPC Linux is very thin on the ground, Ubuntu and Xubuntu seemingly the biggest two. Yellow Dog is another and there might be a Suse or Mandriva if I remember correctly. Is it worth pursuing? Is PPC Linux any good? Or should I ditch my iBook and my ThinkPad and get faster P2 or P3 machine. In the mean time I am going to try Ubuntu 10.04 for PowerPC on my iBook. Any help and advice would be appreciated. Simon --- Twitter: http://twitter.com/SimonRoyal - LowEndMac: http://tinyurl.com/macspectrum - Skype: Simon-Royal. --- IBM ThinkPad 600 running Ubuntu 10.04 & Apple iBook G3 running OSX 10.4. _________________________________________________________________ http://clk.atdmt.com/UKM/go/197222280/direct/01/ Do you have a story that started on Hotmail? Tell us now

1 0

Re: [ALUG] Ubuntu Alternative Fails
by Simon Royal 28 May '10

28 May '10

James Well a retry of 10.04 worked. I went out and when I got back it was asking about grub. i set it, rebooted and is working fine. Havent tested it thoroughly but it seems fairly nippy. Simon --- http://twitter.com/SimonRoyal - http://www.tinyurl.com/macspectrum (sent using Sony Ericsson P990i)

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main