main

main@lists.alug.org.uk

10364 discussions

Desperate Apache Problem!
by Mark Wilkinson 21 Apr '01

21 Apr '01

One of our RedHat servers decided it wasn't going to play ball this morning (worthy of another email on exactly this subject actually) but as an upshot of this, I've had to move several websites to another server that is being good. So... ftp'ed the websites to the other server and cut-n-pasted the apache config file etc. After fidding around a bit have managed to get everything up and running -except- for two virtual domains which aren't behaving themselves. As it happens, these two domains are on both 80 and 443 (SSL). When I access them, I get an HTTP 302 which I don't really understand. All the other domains are working fine. Have examined the logs and used telnet to connect to port 80 to see exactly what headers etc are coming back. Normally, a 302 should give a URL to redirect to, which in this case is "http://" without any other info. Weird. Any ideas/clues - am getting very frustrated now? Cheers. Mark W. PS. apache 1.3.14 w mod_ssl 2.5.1 and mod_php4.0.4pl1

3 4

Re: [Alug] can anyone help with installing a driver?
by Jenny_Hopkins＠toby-churchill.com 21 Apr '01

21 Apr '01

>I always thought that the "modconf" program would do it all for you? >It was pretty straight forward when I installed the same network card. It seems to do much the same things as insmod, on looking at the man page. I don't think I've done a single thing that has been "straightforward" since i started doing linux.....makes me suspicious. Perhaps i should stick to being a musician.

6 8

Network Woes!
by Mark Wilkinson 21 Apr '01

21 Apr '01

OK, Here's another one for you experts out there. We've got a 24 port hub/switch in telehouse which is connected to a router. We've got several machines connected up and they are running great. No problems. Excellent connectivity. One of our guys goes down to London yesterday and swops a network card in one of the boxes and installs a fresh new RedHat box in the cabinet for us to play with. Things start to go weird.. The box with the new network card in it and the totally new box can see all the other machines on the subnet and they can see each other. Fine up to now. So.. I try to telnet into these boxes from home (NTL dialup modem) and can't access them. I can access all the other machines on that subnet no problem but not those two machines. In addition, those two machines can't see the router that's attached to the hub. I'm running no clever firewalling or anything on any of those machines. My thoughts are that the switch is misbehaving and is about to smoke or that the router is selectively ignoring certain addresses... Any other thoughts on this? Cheers. Mark W.

4 3

Re: [Alug] can anyone help with installing a driver?
by MJ Ray 20 Apr '01

20 Apr '01

Jenny_Hopkins(a)toby-churchill.com writes: > So does it make sense to create a directory called 3c509 and put the same > info in it and run update-modules? How does update-modules know that it now > edits in from the new 3c509 file rather than the ne file, if so? Personally, I'd make a file and check over the "aliases" file too for good measure. Grep for ne in there if you want to be really sure. > I'm in a "groan, this is all too hard" mood today. man update-modules seems to say as much as there is, but I can't believe that of Debian... it's probably in a manual somewhere too. -- MJR

2 1

Re: [Alug] can anyone help with installing a driver?
by Jenny_Hopkins＠toby-churchill.com 20 Apr '01

20 Apr '01

>Personally, I'd make a file and check over the "aliases" file too for >good measure. Grep for ne in there if you want to be really sure. Yep, I made the 3c509 file, ran the update modules, and sure as eggs it has picked it up. However, somewhere the card is still bound to ne.....not in aliases, not in modules.conf.....so when I try to bring up eth0 it is telling me "ne.c: No NE*000 card found at i/o=0x2a0 eth0: unknown interface: No such device"........anyone have any idea? Thanks, Jenny.

1 0

can anyone help with installing a driver?
by Jenny_Hopkins＠toby-churchill.com 20 Apr '01

20 Apr '01

Hi All, I've swapped my DLink net card for a 3com509B to see if I can get better results. I've got as far as loading the necessary 3c509 driver and associating it with eth0, rather than the previous ne driver. However, being unfamiliar with Debian I am not sure as to how to go about changing the modules.conf......in /etc/modutils I have a directory called ne, and in this I edited the address and alias eth0 lines to suit, then ran update-modules. So does it make sense to create a directory called 3c509 and put the same info in it and run update-modules? How does update-modules know that it now edits in from the new 3c509 file rather than the ne file, if so? I'm in a "groan, this is all too hard" mood today. Thanks, Jenny.

1 0

Re : Weird FTP Problem
by Mark Wilkinson 20 Apr '01

20 Apr '01

Just did an "ifconfig -a" on this machine and got these results... lo Link encap:Local Loopback inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:3924 Metric:1 RX packets:768631 errors:15310 dropped:0 overruns:0 TX packets:0 errors:0 dropped:0 overruns:768631 eth0 Link encap:10Mbps Ethernet HWaddr 00:01:02:57:DD:B5 inet addr:213.254.160.138 Bcast:213.254.160.191 Mask:255.255.255.192 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2147483647 errors:17121303 dropped:0 overruns:0 TX packets:0 errors:0 dropped:0 overruns:191986865 Interrupt:12 Base address:0x6c00 eth0:1 Link encap:10Mbps Ethernet HWaddr 00:01:02:57:DD:B5 inet addr:213.254.160.140 Bcast:213.254.160.191 Mask:255.255.255.192 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 TX packets:0 errors:0 dropped:0 overruns:0 Interrupt:12 Base address:0x6c00 Who thinks this is a dodgy network card (see overruns on eth0)? Mark W. BTW : Looks like I was wrong about this machine having a 100meg card in it!

2 2

Weird FTP Problem - any ideas guys??
by Mark Wilkinson 20 Apr '01

20 Apr '01

Well, here I am de-lurking at last! Have got a really infuriating problem with no clues on how to solve it. Have got two Redhat machines, one is 6.2, the other is 7.0. They are on the same network with a 100 meg hub between them. They both have 100meg network cards. I'm trying to ftp a 70meg file from the 6.2 box to the 7.0 box. I would expect the the transfer to take a matter of seconds but it takes an eternity and seems to get slower and slower as it progresses we're talking transfer rates of < 1K here. I'm totally stumped as to what is causing this and need some kind of tool to analyse the problem and work out what is going wrong here. Any ideas about this please? Cheers. Mark Wilkinson IT Manager Triad Internet Blue Triangle Hosting http://www.triad-internet.co.uk http://www.bluetriangle.net

1 0

Re: [Alug] Unix File sharing
by David Freeman 19 Apr '01

19 Apr '01

--- Neill Newman <neill(a)entora.co.uk> wrote: > Adam Bower wrote: > > > > On Thu, 12 Apr 2001, David Freeman wrote: > > > > > Can any one make some recommendations as to the best and most > secure > > > method of sharing files under unix. Th machines are behind a > firewall, > > > but sat in the DMZ, so we want th minimium number of ports to be > left > > > open. > > > > Use NFS and make sure that you have it configured properly and > don't allow > > any NFS traffic through your routers. > > most secure method is definatly not NFS !! use samba instead... Is this being serious(thats not sarcasm, its a genuine question)? I thought that samba was a MS based protocol and as such was as secure as a wet paper bag? Is it really better than NFS? if it is I will remove the NFS from the plan as samba may be used for the nt support. Thanks D > Sz > > > > > Adam > > -- > > Adam Bower, <abower(a)zeus.com> Tel: +44 1223 525000 > > System Administrator Fax: +44 1223 525100 > > Zeus Technology Ltd http://www.zeus.com > > Zeus House, Cowley Road Cambridge CB4 0ZT England > > > > _______________________________________________ > > alug, the Anglian Linux User Group list > > Send list replies to alug(a)stu.uea.ac.uk > > http://rabbit.stu.uea.ac.uk/cgi-bin/listinfo/alug > > See the website for instructions on digest or unsub! > > -- > Open source solutions at http://www.entora.co.uk/ > ATTACHMENT part 2 application/x-pkcs7-signature name=smime.p7s __________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/

3 9

Re: [Alug] Poster Worries From A Virgo
by Jenny_Hopkins＠toby-churchill.com 19 Apr '01

19 Apr '01

http://argosaa.tripod.com/alug/index.html Need to know if more info is necessary (if so WHAT?!!!) and if anyone can print them nice and cheaply, if so how many and who shall they be sent to for distribution.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main