main

main@lists.alug.org.uk

3 participants
10374 discussions

RE: [Alug] Woody
by Jonathan Dye 04 Dec '02

04 Dec '02

MJ Ray wrote: > Jenny_Hopkins(a)toby-churchill.com > <Jenny_Hopkins(a)toby-churchill.com> wrote: >> Have you tried logging in to a console and rerunning XF86Setup? >> (Hold down CTL + ALT + F1 if you are stuck on the blank Xwindow >> screen, this will bring you to a log-in console on tty1, then, as >> root, type > > dpkg-reconfigure xserver-xfree86 # XFree86 4.x > dpkg-reconfigure xserver-svga # XFree86 3.x usually > > may be preferable in some circumstances. Might be worth doing an apt-get install read-edid first and then the reconfigure should hopefully detect the resolutions your monitor supports automatically (if it's not ancient). JD _____________________________________________________________________ This message has been checked for all known viruses by the MessageLabs Virus Scanning Service

1 0

Re: [Alug] Woody
by Jenny_Hopkins＠toby-churchill.com 04 Dec '02

04 Dec '02

>Hello everyone, > I have joined the list not long ago. My name is Francesco, foreign > student here in the UK. Welcome to the list. >I have made a mistake during installation at basically "monitor setup" >stage so now when the X server starts (at the login screen) nothing is >displayed and the monitor goes blind just giving some frequency values >and a NOT SUPPORTED message (I figured the selected resolution and >frequency match cannot be handled my thge stupid monitor..). Do you know >if that can be fixed without having to reinstall the whole system again? >Many thanks for ANY help/opinions. Have you tried logging in to a console and rerunning XF86Setup? (Hold down CTL + ALT + F1 if you are stuck on the blank Xwindow screen, this will bring you to a log-in console on tty1, then, as root, type XF86Setup). Jen.

2 1

Woody
by franardia＠the-fastest.net 04 Dec '02

04 Dec '02

Hello everyone, I have joined the list not long ago. My name is Francesco, foreign student here in the UK. I am a Linux newbie I must say, and I am desperately trying to do away with M$... I had Woody installed until a few days back on my second HDD and reinstalled it today after some serious hardware problems(all was working fine anyway until then). I have made a mistake during installation at basically "monitor setup" stage so now when the X server starts (at the login screen) nothing is displayed and the monitor goes blind just giving some frequency values and a NOT SUPPORTED message (I figured the selected resolution and frequency match cannot be handled my thge stupid monitor..). Do you know if that can be fixed without having to reinstall the whole system again? Many thanks for ANY help/opinions. Francesco -- http://fastmail.fm - One of many happy users: http://www.fastmail.fm/docs/quotes.html

2 1

RH 7.3 Install
by jamie.french＠talk21.com 04 Dec '02

04 Dec '02

Hi Guys, After downloading RH7.3 and conducted a linux mediacheck when at partitioning stage I receive the following error "Partition table on device sda was unreadable. Initialize this drive Yes/No." By selecting Yes the following error occured "no valid devices were found to create new filesystems". Thus the system kills sessions and reboots. By checking system messages (ctrl+alt+F4) at various points I can determine that the SCSI card and devices where detected. Though after receiving the final error messege the following system message appears a number of time "parity error detected in data-in phase". Please bear in mind this machine has been running SuSe without any difficulties. Machine Spec: Supermicro P6SBU 196MB Onboard AIC-7890 SCSI ULTRA2/LVD Seagate 9GB LVD Any help would be great as I am trying to learn this sh*t. Take Care, Jamie Best Regards, Jamie French -------------------- talk21 your FREE portable and private address on the net at http://www.talk21.com

2 1

Urgent Help
by jamie.french＠talk21.com 03 Dec '02

03 Dec '02

Hi Guys, Hope you all had fun yesterday, unfortunately I was unable to attend due to family constraints. I have just been approached with a job that requires Redhat 7.x experience, I have used Redhat many moons ago and the grey cells are a bit clouded, as many of you know I use SuSe. So what is the best way I can learn Redhat in the next few days i.e. book recommendations with good references to administration for corporate networks ... The book also needs basics as well. Thanks in advance, Jamie Best Regards, Jamie French -------------------- talk21 your FREE portable and private address on the net at http://www.talk21.com

4 3

Re: [Alug] Urgent Help
by Jenny_Hopkins＠toby-churchill.com 02 Dec '02

02 Dec '02

Jamie: O'Reilly books are always pretty excellent., try a book from them on basic administration, then get a red-hat specific book to go with it? http://www.oreilly.com/ http://www.amazon.co.uk/exec/obidos/ASIN/B000066TFZ/ref=er_ra_acc_dp_b/026-… Jen.

1 0

Urgent Help
by jamie.french＠talk21.com 02 Dec '02

02 Dec '02

Hi Guys, In my plight to renew and train grey matter, has any1 used this book? Sounds good and may get me out of a pickle. http://www.amazon.co.uk/exec/obidos/ASIN/0130084662/qid=1038835931/sr=2-3/r… Take Care, Jamie Best Regards, Jamie French -------------------- talk21 your FREE portable and private address on the net at http://www.talk21.com

2 1

Yesterday's meeting.
by Jenny_Hopkins＠toby-churchill.com 02 Dec '02

02 Dec '02

Hi, Did tremendous things re. the introduction to linux lectures take place? I ended up with two children and no transport (well, no I had the bike, but three is a bit of a squash) yesterday as Mossey needed the car for the day, bah. I'll *never* get my modem working. :-( Jen.

1 0

Weekly IRC reminder
by Neill Newman 02 Dec '02

02 Dec '02

This is the automated ALUG IRC meeting reminder sent to remind you that there is an IRC meeting tonight (Monday) at 8.00pm. The meeting takes place on the irc server irc.alug.org.uk in the #alug channel. Most IRC clients should allow you to get there with the commands "/server irc.alug.org.uk" and "/join #alug". Popular IRC clients include tkirc, bitchx, xchat and EPIC on Unix, and Mirc under windows. Here are some links to help you get started with irc. Unix http://www.xchat.org/ http://freshmeat.net/ http://www.epicsol.org/ Windows http://www.mirc.com (loads of help with irc for newbies!)

1 0

Gentoo questions..
by Paul 01 Dec '02

01 Dec '02

Hi Folks After installing RH8.0 over the weekend and getting really (and I mean *really) **** off with yet another compiler producing broken binaries, I think it's about time to look at another linux base. Some questions for the Gentoo experts (cos gentoo.org times out on me). Do I need an existing linux install as I would with Linux From Scratch ? What compiler does it use ? Does the gentoo CD come with sources for useable desktop environments such as KDE ? How long would it take to build a working system (complete with X and KDE) on a Duron 800MHz box ? Regards, Paul.

9 12

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main