main

main@lists.alug.org.uk

10368 discussions

RE: [Alug] UEA Meeting - who's going
by Jenny_Hopkins＠toby-churchill.com 19 Nov '01

19 Nov '01

>can anyone tell me what to expect/what happens at the >meetings? If you have a brought along a box: rush in trailing wires, plug it all back together, network it up to any other boxes, and prepare to have your most tender secrets exposed to the anglian linux community ("What's THIS you've done to your php.ini file?") If you haven't: bring biscuits instead and eat them whilst watching everyone else being busy.

1 0

lilo startup crash(mandrake 8.0)
by Dryden 19 Nov '01

19 Nov '01

Finally i have a nice working email service that i can use in collage(as you can tell from my email addy ;-). I have messed about with the config file for lilo (/etc/lilo.conf). this was so that i could added my new kernel as the default for startup but now my Linux box just freeze after the time to select an option is up. It will boot up fine if i stop the countdown and select my option. Any one know what is wrong with this? It seems to mount my hard disk drives in its freeze time as it checks my hard drives(with fsck) when i next boot it properly. If you need to see my config file ill put it on my site and post a link to it, just mail me back and ask. Dennis Dryden ********************************************************************** IMPORTANT: This email and its attachments are intended for the addressee only and may be confidential. If they have come to you in error you must take no action based on them nor must you copy or show them to anyone; please telephone us immediately. The contents of this email and attachments represent the views of the sender and are not necessarily the representative of the views of The College of West Anglia **********************************************************************

2 1

RE: [Alug] UEA Meeting - who's going
by Peter Bassill 19 Nov '01

19 Nov '01

How does one get there? Can anyone give me directions please? -----Original Message----- From: Dryden [mailto:Ddryden@cmp.col-westanglia.ac.uk] Sent: 19 November 2001 13:03 To: main(a)lists.alug.org.uk Subject: Re: [Alug] UEA Meeting - who's going Ye ill try to come :) Itll be the first one ive been to... can anyone tell me what to expect/what happens at the meetings? ********************************************************************** IMPORTANT: This email and its attachments are intended for the addressee only and may be confidential. If they have come to you in error you must take no action based on them nor must you copy or show them to anyone; please telephone us immediately. The contents of this email and attachments represent the views of the sender and are not necessarily the representative of the views of The College of West Anglia ********************************************************************** _______________________________________________ main(a)lists.alug.org.uk http://www.anglian.lug.org.uk/ http://lists.alug.org.uk/mailman/listinfo/main Unsubscribe? See message headers or the web site above!

1 0

Re: [Alug] UEA Meeting - who's going
by Dryden 19 Nov '01

19 Nov '01

Ye ill try to come :) Itll be the first one ive been to... can anyone tell me what to expect/what happens at the meetings? ********************************************************************** IMPORTANT: This email and its attachments are intended for the addressee only and may be confidential. If they have come to you in error you must take no action based on them nor must you copy or show them to anyone; please telephone us immediately. The contents of this email and attachments represent the views of the sender and are not necessarily the representative of the views of The College of West Anglia **********************************************************************

1 0

re how do I
by tom potts 19 Nov '01

19 Nov '01

If you want to avoid the browser wrapping text in html the easiest way if to use the <pre> ...</pre> tags which displays any text in between "as is" - is short fro preformatted. If you are 'parsing' in log files to an html file then write "<pre>" to the output file and then copy the (I presume txt file) straight in (you might want to check for the </pre> tag and htmlise that just in case) and then slap the "</pre>" tag after it. Tom __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com

2 1

Apache mod_perl - Does it have the perl interpreter build into mod_perl or does it load it from elsewhere
by Steve Fosdick 18 Nov '01

18 Nov '01

I have tried reading some of the mod_perl docs but didn't find the answer to this one... With a web server with mod_perl available, is the perl interpreter itself embedded in the mod_perl.so module, or does mod_perl.so load the perl interpreter from some external source, e.g. a libperl.so that is part of the systems normally perl installation. I am interested primarily to know if upgrading the perl version on a system using mod_perl will: a) cause the newer perl intrepreter to usedby Apache. b) break mod_perl by having perl modules that assume a recent version of the perl interpreter but actually get run under an older one in mod_perl. Does anyone know please? Steve.

2 1

Gmix and Sound Card Identification
by Steve Fosdick 18 Nov '01

18 Nov '01

Hi, Does anyone please knoe gmix (the Gnome mixer) determines the type of sound card installed and which controls it has? Gmix used to be identify my card correctly as an ES1371 and offer me a record level control, but not gmix thinks it is a Tritech??? and offers no such control. In the absense of the control the record level seems to be set permanently to zero! Steve.

1 0

Re: [Alug] Apache mod_perl - Does it have the perl interpreter build into mod_perl or does it load it from elsewhere
by MJ Ray 18 Nov '01

18 Nov '01

Steve Fosdick: > With a web server with mod_perl available, is the perl interpreter itself > embedded in the mod_perl.so module, or does mod_perl.so load the perl > interpreter from some external source, e.g. a libperl.so that is part of > the systems normally perl installation. "It depends." If you're just using the normal perl you get with most distributions, then I think mod_perl has most of the perl interpreter inside it. If you're using a perl built as the mod_perl docs instruct you to, then it's nearly all loaded in from a shared library. To be safe, recompile your mod_perl or install the two perls side-by-side. -- MJR

2 1

I'm looking for suggestions
by bsamuels＠beenthere-donethat.org.uk 17 Nov '01

17 Nov '01

I want to upgrade my relatively elderly machine ( dual 233 Mhz pentiums) but it will probably mean that I won't be able to use my ISA modem as there are no ISA slots on modern boards. I want to avoid using an external modem. So I'm thinking of using an even older machine as a firewall/gateway into which I can fit my modem and a network card and then connect to the internet via that. I am running KDE 1.something and use a little utility called kpppload which displays a small window showing transfer rates in figures and as a graph continuously updated. I would feel lost without this as, if transfers stop, this little window tells me at a glance that rates are down to zero and it gives an indication if transfer rates are slower than they should be. If I set up this gateway as proposed it will not have X and therefore no little kpppload window. Is there any way of displaying data transfer rates on a standard console in a similar fashion (the graph is not essential) ? Any suggestions would be appreciated. Barry Samuels

4 4

Translating source code
by Paul 17 Nov '01

17 Nov '01

Hi Folks Reading through a source file in preparation to port the code, I find half the comments are in Italian (I think). My knowledge of foreign languages is worse than C++, so I ran some of it through one of the free translation sites. Barely readable, and I *think* I now understand the comments but.... /* Se e' il primo ingresso nella procedura e ho letto un solo byte, allora e' arrivato lo 0x0F di risposta all-inizializzazione del touch controlloer */ /* Sto gia' leggendo un pacchetto normale */ Fed into www.freetranslations.com and it becomes: /* If it is the first entrance in the procedure and I have read an alone one byte, then is arrived the 0x0F to answer all-inizializzazione of the touch controlloer */ /* I Am gia' reading a normal packet */ Ain't Linux fun <g> Regards, Paul.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main