main

main@lists.alug.org.uk

3 participants
10374 discussions

Re: [Alug] Using NTL Broadband with Linux
by Laurie Brown 03 Aug '02

03 Aug '02

Ian Douglas wrote: > > I currently have a spare hard disk with windoze already installed on it > which I can temporarily put in the firewall PC for the registration process. That'll work... It will make things simpler. > I think the sales rep said they currently recommend "Terayon TeraJet 210" > cable modems. I know nothing about those. You'd better be sure they do RJ45! > Found the DHCP Mini-HowTo. Will print it out and start reading it later > today. DHCP is easy, frankly. The firewall needs to run dhcpcd (the client) to talk to NTL. My IP address has only changed once in more than a year. One of the good things about dhcpcd is it polls NTL every 3 hours and renews the lease so it never expires. > The NTL sales rep eagerly rang back last night, still as clueless as before, > but this time he offered me free installation if I signed up there and then > so I went ahead and booked it up for 14 August. From what I could gather > all the engineer will do is install a cable modem socket, give me a list of > companies from whom I can obtain a modem, then disappear out of the door. > If I want him to bring a modem with him and setup my PC for me (Windoze PCs > only) then there is a £50 installation charge. I chose the D.I.Y route. I rent my CM from NTL, a decision made because I knew that new models were being deployed in some places and I wanted a free upgrade. I got a new one! The engineers were very helpful, put the cable end where I wanted it, made me up an extra long cable for inside, and dropped off the CM. I did the rest. It isn't worth £50! > Thanks for all your help and advice Laurie, My pleasure. I wish I had more time to help more. I'm in Ipswich, BTW. Cheers, Laurie. -- --------------------------------------------------------------------- Laurie Brown laurie(a)brownowl.com PGP key at http://pgpkeys.mit.edu:11371 ---------------------------------------------------------------------

3 2

Re: [Alug] Getting programs to run
by Ricardo Campos 03 Aug '02

03 Aug '02

> Where do I > go searching for these missing files? Heh, I'm SO glad I use a non-rpm based distro. try freshrpms.net and www.rpmfind.net Or use the mandrake package manager. Remember u can add internet sites as sources to it. Ricardo -- Get your free email from www.linuxmail.org Powered by Outblaze

2 1

Getting programs to run
by Kelly Ash 02 Aug '02

02 Aug '02

I've loaded a program on here from a CD and was using KDE. Although it showed up in my packages I can't figure out how to get it to run! I was going to try 'run' but I'm not sure what to type in. I tried just the name of the program but that didn't work. I'm using Gnome more and more, think I like it better, and Gnome shows an icon for the program but when I click on it nothing happens. What've I done or not done properly? Also, when you're installing a program and it states you need other files, does that mean for certain that they aren't on here? Where do I go searching for these missing files? Thanks, moving along in baby steps *g* Kelly

1 0

Choice of E-mail Clients + Stuff
by Keith Watson 02 Aug '02

02 Aug '02

Canon S400 printer now works a treat. The combination of Gimp-Print + CUPS + espgs will cope with an amazing list of different printers (espgs is a specially tweaked version of ghostscript that 'knows' about CUPS and Gimp-Print supplies all the printer definitions). More good news after visiting www.linmodems.org I discovered that the chipset in my internal modem card (not a 'proper' modem but a so-called winmodem) is one that has a set of Linux drivers available (I have the Lucent chipset see http://www.heby.de/ltmodem). After studying the Linmodem, Modem and PPP howto's, I installed PPP and the drivers plus the Gnome PPP application and applet and (after an initial bit of hassle with PAP) it now all works a treat!! I was able to happily dial into my ISP and browse the web with Opera. :o) :o) :o) Interestingly I think web browsing seems faster under GNU/Linux than it is under Windows(2K). Perhaps there's just less OS overhead getting in the way?. Now the questions; 1) What security precautions should I be taking now I can connect to the internet? Can anyone recommend some useful resources I should study? Any basic initial measures I should take? 2) Is it worth reviewing the PPP and IP setups with a view to optimising the modem performance? or are any improvements likely to be marginal? 3) Can anyone recommend some mail clients that work with Gnome? There seem to be loads on Sourceforge and Freshmeat. Some guidance with narrowing down the list would be most helpful. 4) I'd also like to migrate my existing M$ Outlook mailbox over to the new client. Has anyone ever done this? Is it possible? Regards, Keith ____________ The little things in life are as interesting as the big ones. Henry David Thoreau

2 1

Re: lists.alug.org.uk mailing list memberships reminder
by Ian Douglas 01 Aug '02

01 Aug '02

On Thursday, August 01, 2002 6:54 AM, <mailman-owner(a)lists.blackcatnetworks.co.uk> wrote: <snip> > If you have questions, problems, comments, etc, send them to > mailman-owner(a)lists.blackcatnetworks.co.uk. Thanks! </snip> blackcatnetworks ??? Ian.

2 2

Re: Using NTL Broadband with Linux
by tom potts 01 Aug '02

01 Aug '02

It might be worth digging a bit deeper into the 'contract' The reason why they dont like you to use Linux is becaus Linux tends to use Masquerading rather than the Proxy that is common with W$. With Proxy they can tell how many PC's you are using on the inside at any time. Its not so easy with Linux routing/firewall so you may actually be in breach of their T&C's using it and you may be cut off as a result! That may be 'urban paranoia' but, as Laurie said, they all seem to insist on w$ on the inside. This may be due to the fact the sales staff are taps but with consume.net ramping up I think not. Can anybody get copies of the contracts for these things - they're not easy to find online? Tom __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com

1 0

DVD Hardware Decoders
by Daniel Simpleman 31 Jul '02

31 Jul '02

I have a P821 DVD Decoder card which is based on the ALI M3309 chipset and I was wondering if its compatible for linux its old (1999) and they dont make anymore drivers for it. They did not even make any linux drivers. __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com

1 0

Using NTL Broadband with Linux
by Ian Douglas 31 Jul '02

31 Jul '02

Are there any ALUG members on the list who have their Linux network connected to the internet via NTL Broadband? An NTL sales rep rang me last night trying to get me to sign up for their broadband service. Unfortunately I think he was just reading a pre-prepared script as he was unable to answer many technical questions. In particular he was adamant that their cable modem box needed to be connected to a PC running Windows 98 or higher (*NOT* Linux). Has anyone managed to get round this as I would prefer my firewall (the PC on my network which will actually be connected to the NTL box) to continue to be Linux based rather trying to find a Windows based solution. Ian.

4 6

OFTC down?
by John Woodard 29 Jul '02

29 Jul '02

I cannot get any response from the OFTC web site or irc server, does anybody know something that I don't? -- Cheers, BJ

2 1

installing from cover CDs
by Glen Tyler 29 Jul '02

29 Jul '02

Hi All, I know that cover CD's seem to cause much furrowing of brows but..... Although I have been toying with linux for nearly a year, I have just used RedHat up until now. So I thought that I might get a lightweight distro from the covers of Linux Format. Gentoo and The LRS distros look interesting, but how are they installed? If I burn the iso image onto CD what do I do next?. When I installed RedHat I remember that I had to make a floppy with the boot image to launch the installer, but where would I get that from for these OSs? Although I've looked at the disc and mags there does not seem to be an idiots guide to this (which is what I need). I like to find things out for myself if possible - but don't know where to go from here. what I need is a simple instruction list something like.. 1) burn the gentoo iso image file onto a CD 2) get *****.*** file onto a floppy from??? 3) boot using floppy 4) mount CD 5) start install can anyone help? Thanks Glen

4 4

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main