main

main@lists.alug.org.uk

10368 discussions

Re: [Alug] Red lodge meeting - going ahead?
by MJ Ray 17 Oct '01

17 Oct '01

"NuTTeR" <dennis(a)nofx.com> writes: > What town city is this meeting in? sorry im new to the list(kinda). Red Lodge is a village (I think) between Mildenhall and Newmarket. It might be in Suffolk or Cambridgeshire. I suspect Suffolk. -- MJR

1 0

Re: [Alug] pcmcia/eth0
by MJ Ray 17 Oct '01

17 Oct '01

"Ricardo Campos" <corez23(a)linuxmail.org> writes: > I can't stand on-screen text for too long, great fan of books. Actually, that's what I use Plucker and my Palm III for more than anything. Reading stuff that I can't bear to read on-screen. I should start to take more email on it, I think (any suggestions for a good palm offline email system, anyone, or should I brew my own with Plucker and jpilot?), but I eat batteries quite well already! -- MJR

1 0

Re Progeny
by John Seago 17 Oct '01

17 Oct '01

I have the `Linux Emporium' Disks for Progeny, but I did'nt manage to get it to install, as once past the initial stage, I could'nt get it to display, of course there may well be something wrong with the resolution `thingy' in my monitor. I also understand from a review that it will only install an american keyboard layout. Not very helpfull I know, but it's the best I can do. I am also rather puzzled as to why messages 3, 4, 5, 7 & 8 are somewhat wider than my screen. is this another manifestation of the =20 phenonmena? John

1 0

Re: [Alug] Linux and USB - follow-up
by Edenyard 17 Oct '01

17 Oct '01

On 16 Oct 2001 17:56:33 +0000, Willaby <willaby(a)pgen.net> wrote: > Cant remember from the first thread, but do you know that usb is > actually working ? > Well - I suppose that it must be, if I can get the pictures from the camera. I think that it always was - there seemed to be the right sort of things in the various /proc directories. It was the final step of mounting the emulated SCSI that seemed always to fall over before I moved to kernel 2.4.6. Gerald.

2 1

Re: [Alug] pcmcia/eth0
by MJ Ray 17 Oct '01

17 Oct '01

"Ricardo Campos" <corez23(a)linuxmail.org> writes: > 2) When I issue a Shutdown Now command from the shell, it shuts down > and I get a $BASH prompt. What command are you issuing? I don't debug English very well. "shutdown -h now" should work, unless something is fried. > [...] How can I shut down (i.e. power off) the laptop without > frying the HD every time, cos at some point I'm going to do some > damage to the data. :( -- Emergency sync is AltGr-SysRq-s Emergency unmount is AltGr-SysRq-u -- MJR Do you need advice about the Internet or particular net services? Why not talk to my employers? See http://www.luminas.co.uk/ for details.

1 0

Re: [Alug] Red lodge meeting - going ahead?
by NuTTeR 17 Oct '01

17 Oct '01

Why not scan the map and put it on the Alug web site? What town city is this meeting in? sorry im new to the list(kinda). --------------------------------------------------------------------- Get your free email address today at www.nofx.com!

1 0

Re: [Alug] pcmcia/eth0
by Ricardo Campos 17 Oct '01

17 Oct '01

> http://www.linuxdoc.org/HOWTO/PCMCIA-HOWTO.html Card seems to be OK... Beeep! I've just printed off the PCMCIA and Networking HOWTO's. I can't stand on-screen text for too long, great fan of books. > >2) When I issue a Shutdown Now command from the shell, it shuts down and I > get a $BASH >prompt. > Does it not get as far as a "power down" message? > Jenny. Oh yes, it does all the groovy things my other system does, stopping the daemons etc... then it seems to start up again into the login prompt, or after a lot more shutdown commands, puts me into the $BASH prompt. (as opposed to <ricardo@Azathoth>$ type prompt). I'll try old nuTTer's -h flag idea, and keep ya posted -- Get your free email from www.linuxmail.org Powered by Outblaze

1 0

Re: [Alug] pcmcia/eth0
by Jenny_Hopkins＠toby-churchill.com 17 Oct '01

17 Oct '01

Ricardo Campos wrote: >How can I tell if it's actually recognising the card properly? How can I link it to eth0? If the card is recognised and configured correctly you will get a high beep followed by a low beep at startup i think. try here: http://www.linuxdoc.org/HOWTO/PCMCIA-HOWTO.html >2) When I issue a Shutdown Now command from the shell, it shuts down and I get a $BASH >prompt. Does it not get as far as a "power down" message? Jenny.

1 0

pcmcia/eth0
by Ricardo Campos 17 Oct '01

17 Oct '01

I have recently installed RH6.1 on my notebook, with no X (yay!). I have 2 problems with it:- 1) When it boots up, the PCMCIA service starts...OK then it comes up with 'delaying eth0 initialisation'. In /etc/pcmcia/config, it has a list of supported cards and mine - d-link de-660 is included (amongst about 100 others). How can I tell if it's actually recognising the card properly? How can I link it to eth0? The floppy drive is bust on the notebook (can read, can't write), so a network card is essential!!! I created a ifcfg-eth0 file in /etc/sysconfig using ifcfg-lo as a template- except with correct IP's. If I manually start ifcfg eth0 up I still get the same problem. :-/ 2) When I issue a Shutdown Now command from the shell, it shuts down and I get a $BASH prompt. Any number of quit, exit, shutdown commands don't seem to work and I end up powering off the laptop. How can I shut down (i.e. power off) the laptop without frying the HD every time, cos at some point I'm going to do some damage to the data. :( -- Get your free email from www.linuxmail.org Powered by Outblaze

1 0

Progeny Debian install problems
by NuTTeR 17 Oct '01

17 Oct '01

Has anyone tryed to install this version of GNU/linux? I got a copy from the Linux format mag. it has two iso images for the install disks. So ive made the two disks but there is no time during the install that i get asked to insert the second cd so none of the software gets installed thats on it :(. Also adding packages to my box after ive installed im geting problems... but i cant remember the error message atm. Any one else geting this problem? --------------------------------------------------------------------- Get your free email address today at www.nofx.com!

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

main