- main - earth.li

Slight DNS fu
by markj＠cloaked.freeserve.co.uk 01 Sep '01

01 Sep '01

Hi all, alug.org.uk has had some DNS problems. Martyn assures me that all will be fine soon. Thanks for your patience during this difficult time. ;-) Talk to you soon, MJR

1 0

Re: [Alug] diald
by MJ Ray 30 Aug '01

30 Aug '01

Raphael Mankin <raph(a)panache.demon.co.uk> writes: > I had no trouble with diald. The advantage of using it, over cron, > is that the itnerface appears to be there at all times, even if it > is not active. Using cron to change your filter on ppp0 (which is there all the time pppd is running) has the same effect.

1 0

Crying Wolf
by Earl Brannigan 30 Aug '01

30 Aug '01

Hi John > Subject: [Alug] Crying Wolf > I would be grateful however if > someone can hazard a guess at why the programmes on my first hard > drive seem to be either self destructing or slowly dieing, a bit at a > time? A stab in the dark : I had a similar problem once where I had 64Mb of memory installed and Linux 'thought' I had 128 Mb installed. View /etc/lilo.conf and check for : append = "mem=XXX" where XXX is a value representing how much memory is installed, eg. if you have 128MB of memory the line should read : append = "mem=128M" if it reads more than you have then you have a problem anyway, regardless of whether this is the cause of this particular problem (As Linus Torvalds puts it "Bad things will happen"). The Linux Kernel addresses up to 64Mb of memory by default so up to that amount you should be safe (though I do remember reading somewhere that its always safer to specify exactly how much even if less than 64Mb). If you have >64Mb installed but there is no line in lilo.conf you will only address the 1st 64Mb. So you would need to add a line to address the full memory : Here is a dump from mine : ---------snip----------- boot = /dev/hda timeout = 50 linear prompt default = linux vga = normal read-only map=/boot/map install=/boot/boot.b image = /boot/vmlinuz-2.2.19.0 label = linux append = "mem=128M" root = /dev/hda1 ---------snip----------- The " append = " bit is merely passing the value as a parameter to the kernel at boot time. Hope this helps anyway, will continue to rack brains for other possible causes... Regards Earl

1 0

Re: [Alug] diald
by MJ Ray 30 Aug '01

30 Aug '01

Raphael Mankin <raph(a)panache.demon.co.uk> writes: > diald lets you control *when* connections are made. It also provides som > filtering to prevent the connection from being raised for various classes of > traffic. If you replace 'anyreason' by 'little reason', however, I agree with > you. I think all the filtering and timing can be controlled by cron, connection scripts and ipchains/iptables with pppd. It's not such a one-stop-shop, but it is more widely used and stabler, in my experience. I just remember diald being hell to get working. I'm not sure it ever did work correctly for me. Not used it again since, so maybe they've updated it.

2 1

Crying Wolf
by John Seago 29 Aug '01

29 Aug '01

Please ignore last plea for help, I ran the install disk in rescue mode, and while I have no idea what I was doing I managed to get it to work again. This is either very good luck, or very good work on the part of the original programmers. I would be grateful however if someone can hazard a guess at why the programmes on my first hard drive seem to be either self destructing or slowly dieing, a bit at a time? John

1 0

Further developments/failures
by John Seago 29 Aug '01

29 Aug '01

Matters seem to go from bad to worse, having restarted I find that the linux, (Mandrake 8), on disk one has now lost its < file:/usr/share/applink-mdk/XXXXXXXX > the effect is that all thelaunch icons on the panel are now inactive, while those on the desktop still work. Can I as someone who has yet to be able to work the command line mend it, or would it be easier to re-install? john Seago

1 0

Re: [Alug] diald
by MJ Ray 29 Aug '01

29 Aug '01

Danny Thorp <danny(a)thorp.fsworld.co.uk> writes: > Any ideas? Have you tried pppconfig, like the good book says? You might also find pppd's persist option some use. I don't think there's any reason for diald any more.

3 2

Re Screen resolution problems
by John Seago 29 Aug '01

29 Aug '01

On Turning on my computer I found that the resolution problem had solved itself, (albeit not very satisfactorily ). Both sets of Linux are now displaying perfectly, as are their start-up processes. Windows however has dissapeared, it's partition is still there but it is empty! I would very much like to know what I did, in order to avoid doing it again. In case you're wondering why two lots of the same thing, I knew how to get Mandrake 8 to install, and not being sure how to install on my second disk I started with Mandrake 8, I have Red Hat, Progeny, Debian and Slackware as more interesting/exciting projects to install. (They also appear to be wellbeyond my level of competence!). John Seago

1 0

diald
by Danny Thorp 29 Aug '01

29 Aug '01

hello all: I have finally got round to trying debian on an old p120 for evaluation. Results so far are v.good with the exception of diald, which refuses to connect. Accounts are configured as on my Suse machine so settings should be correct. using other methods is no good either, Gppp will not establish session pppd "dies unexpectedly" Wvdial will not allow me access to the modem, permissions are set to 'no auth' and I believe that anyone should be able to initiate a tcp/ppp connection. but no. Any ideas? Ta Danny

3 3

Re: [Alug] Multi-Media Publishing - Print and HTML
by MJ Ray 28 Aug '01

28 Aug '01

Alexis Lee <alexis(a)turton.com> writes: > Well heck yes, but the Grail is not to tweak less, but not to tweak at > all. What are stylesheets but tweaking on a larger scale. I'm sure you could write tex4ht stylesheets and not have to tweak at all. > 80/20 is well known to me. I would say I did maybe three loops of that, > when I could have done it in one loop with Word (space-greedy tables > were what I needed, and apparently the one area LaTeX lacks). That might be because greedy tables are bad. Anyway, I'm sure that they can be done, as I've seen them done. > And I read manuals _extremely_ well... how else am I gonna learn anything > at uni? I'll maintain a respectful silence on that point, I think. [FOP] > Woops. It sounded new, when I looked at the website, and having never > heard of it... Hrm. I don't think it can be that new, as I'm sure we were creating PDFs from XML some time ago. My memory is suspect, so I wouldn't like to hazard a guess as to when exactly and I'm not going fishing the log book for it. Definitely early this year, though.

1 0